Integrated Peripherals - Gigabyte GA-N650SLI-DS4 User Manual

2-3

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
SATA-II RAID Config
On-Chip IDE Channel0
IDE DMA transfer access
On-Chip MAC Lan
Onboard LAN Boot ROM
On-Chip IDE Channel1
NV Serial-ATA Controller
IDE Prefetch Mode
On-Chip USB
USB Keyboard Support
USB Mouse Support
Onboard Audio Function
SMART LAN
Onboard 1394
Legacy USB storage detect
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move Enter: Select
F5: Previous Values
SATA-II RAID Config
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
SATA-II RAID function
x SATA-II 1 Primary RAID
x SATA-II 1 Secondary RAID
x SATA-II 2 Primary RAID
x SATA-II 2 Secondary RAID
: Move Enter: Select
F5: Previous Values
SATA-II RAID function
Enabled Allows users to configure individual SATA channels as RAID or ATA mode.
Disabled Disable the RAID function for all of the onboard SATA channels. (Default value)
SATA-II 1 Primary RAID
Enabled Enable RAID function for the first channel of the first SATA 3Gb/s controller.
(Default value)
Disabled Disable this function.
SATA-II 1 Secondary RAID
Enabled Enable RAID function for the second channel of the first SATA 3Gb/s controller.
(Default value)
Disabled Disable this function.
Integrated Peripherals
[Press Enter]
[Enabled]
[Enabled]
[Auto]
[Disabled]
[Enabled]
[All Enabled]
[Enabled]
[V1.1+V2.0]
[Disabled]
[Disabled]
[Auto]
[Press Enter]
[Enabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
SATA-II RAID Config
[Disabled]
Enabled
Enabled
Enabled
Enabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 41 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup