Advanced Bios Features - Gigabyte GA-N650SLI-DS4 User Manual

2-2

Advanced BIOS Features

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
CPU Hyper-Threading
Limit CPUID Max. to 3
No-Execute Memory Protect
CPU Enhanced Halt (C1E)
CPU Thermal Monitor 2(TM2)
CPU EIST Function
(Note)
Virtualization Technology
Full Screen LOGO Show
Robust Graphics Booster
x VGA Core Clock
Init Display First
: Move Enter: Select
F5: Previous Values
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
Press <ESC> to exit this menu.
First / Second / Third Boot Device
Floppy
LS120
Hard Disk
CDROM
ZIP
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
Legacy LAN
Disabled
Password Check
Setup
System
HDD S.M.A.R.T. Capability
This feature allows your hard disk to report read/write errors and to issue warnings when third-
party hardware monitor utility is installed.
Enabled
Disabled
(Note) This item will show up when you install a processor that supports this function.
Advanced BIOS Features
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
[Enabled]
(Note)
(Note) [Disabled]
(Note) [Enabled]
(Note) [Enabled]
[Enabled]
(Note)
[Enabled]
[Enabled]
(Note)
[Enabled]
[Disabled]
+1%
[PEG]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Select your boot device priority by Floppy.
Select your boot device priority by LS120.
Select your boot device priority by Hard Disk.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP.
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
Select your boot device priority by USB-CDROM.
Select your boot device priority by USB-HDD.
Select your boot device priority by Legacy LAN.
Disable this function.
The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
Enable HDD S.M.A.R.T. capability.
Disable HDD S.M.A.R.T. capability. (Default value)
- 39 -
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help
BIOS Setup