Gigabyte GA-M68SM-S2L User Manual page 38

HDD S.M.A.R.T. Capability
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your
hard drive. This feature allows your system to report read/write errors of the hard drive and to
issue warnings when a third party hardware monitor utility is installed. (Default: Disabled)
Away Mode
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode
allows the system to silently perform unattended tasks while in a low-power mode that appears off
(Default: Disabled)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express
graphics card, or the onboard VGA.
PCI Slot
Onboard VGA Sets the onboard VGA as the first display.
PEG
iGPU Frame Buffer Control
Auto
Manual
Frame Buffer Size
This item is configurable only if the iGPU Frame Buffer Control option is set to Manual.
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. Options are: 16M, 32M,
64M(default), 128M, 256M, Disabled.
GA-M68SM-S2L Motherboard
Sets the PCI graphics card as the first display. (Default)
Sets PCI Express graphics card as the first display.
BIOS will automatically setup the Frame Buffer Size. (Default)
Manual allows Frame Buffer Size item below to be configurable.
- 38 -