Advanced Bios Features - Gigabyte GA-M61SME-S2 User Manual

2-2

Advanced BIOS Features

AMD K8 Cool&Quiet control
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Away Mode
Init Display First
Frame Buffer Size
Onboard GPU
: Move Enter: Select
F5: Previous Values
AMD K8 Cool&Quiet control
Auto
Disabled
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
Press <ESC> to exit this menu.
First / Second / Third Boot Device
Floppy
LS120
Hard Disk
CDROM
ZIP
USB-FDD
USB-ZIP
USB-CDROM Select your boot device priority by USB-CDROM.
USB-HDD
Legacy LAN
Disabled
Password Check
System
Setup
GA-M61SME-S2 Motherboard
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Advanced BIOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
AMD Cool&Quiet driver manages clock and VID to best serve the thermal,
performance and power requirements. (Default value)
Disable this function.
Select your boot device priority by Floppy.
Select your boot device priority by LS120.
Select your boot device priority by Hard Disk.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP.
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
Select your boot device priority by USB-HDD.
Select your boot device priority by Legacy LAN.
Disable this function.
The system can not boot and can not access to Setup page will be denied if the
correct password is not entered at the prompt.
The system will boot, but access to Setup will be denied if the correct password
is not entered at the prompt. (Default value)
[Auto]
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
[Disabled]
[PEG]
[64M]
[Enable If No Ext PEG]
F10: Save
- 34 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults