Gigabyte GA-EX58-UD4P User Manual page 50

System Memory Multiplier (SPD)
Allows you to set the system memory multiplier. Auto sets memory multiplier according to
memory SPD data. (Default: Auto)
Memory Frequency (Mhz)
The first memory frequency value is the normal operating frequency of the memory being used;
the second is the memory frequency that is automatically adjusted according to the BCLK
Frequency (Mhz) and System Memory Multiplier settings.
DRAM Timing Selectable (SPD)
Manual allows all DRAM Timing items below to be configurable.
Options are: Auto (default), Manual.
Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to
Disabled, this item will display as 1.5V. When Extreme Memory Profile (X.M.P.) is set to
Profile1, this item will display the value based on the SPD data on the XMP memory.
Profile QPI Voltage
The value displayed here is dependent on the CPU being used.
>>>>> Channel A/B/C Timing Settings
>>>>> Channel A Standard Timing Control
x CAS Latency Time
x tRCD
x tRP
x tRAS
>>>>> Channel A Advanced Timing Control
x tRC
x tRRD
x tWTR
x tWR
x tRFC
x tRTP
x tFAW
x Command Rate (CMD)
>>>>> Channel A Misc Timing Control
x Round Trip Latency
: Move
Enter: Select
F5: Previous Values
>>>>> Channel A/B/C Standard Timing Control
CAS Latency Time
Options are: Auto (default), 6~16.
tRCD
Options are: Auto (default), 1~15.
tRP
Options are: Auto (default), 1~15.
tRAS
Options are: Auto (default), 1~63.
GA-EX58-UD4P Motherboard
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Channel A Timing Settings
6
6
6
16
22
4
4
8
48
3
13
1
51
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
F10: Save
- 50 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults