Gigabyte GA-8TRS350MT User Manual page 37

IDE Primary Master, S lave / IDE Secondary Master, Slave
IDE HDD Auto-Detection Press "Enter" to select this option for automatic dev ice detection.
IDE Dev ice Setup. You can use one of three methods:
Auto Allow s BIOS to automatically detect IDE dev ices during POST(default)
None Select this if no I D E dev ices are used and the sy stem w il l skip the automatic
detection step and allow for faster sy stem start up.
Manual User can manually input the correct settings
Access Mode Use this to set the access mode for the hard driv e. The four options are:
CHS/LBA/Large/Auto(default:Auto)
Hard driv e information should be labeled on the outside driv e casing. Enter the appropriate option
based on this information.
Cy linder Number of cy linders
Head Number of heads
Precomp Write precomp
Landing Zone Landing zone
Sector Number of sectors
If a hard disk has not been installed, select NONE and press <Enter>.
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the
computer.
None No floppy driv e installed
360K, 5.25 in. 5.25 inch PC-ty pe standard driv e; 360K by te capacity .
1.2M, 5.25 in. 5.25 inch AT-ty pe high-density driv e; 1.2M by te capacity
(3.5 inch w hen 3 Mode is Enabled).
720K, 3.5 in. 3.5 inch double-sided driv e; 720K by te capacity
1.44M, 3.5 in. 3.5 inch double-sided driv e; 1.44M by te capacity .
2.88M, 3.5 in. 3.5 inch double-sided driv e; 2.88M by te capacity .
- 33 - BIOS Setup