6) IDE1/ IDE2(IDE1/IDE2 Connector)
Each IDE connector can connect with one IDE cable to connect the IDE hard drive with the computer.
It is recom mended that the first hard drive be connected to the IDE1 connector while the disk drive be
connected to the IDE2 connector.
7) S_ATA1/S_ATA2 (Serial ATA Connector)
Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA
and install the proper driver in order to work properly.
40
2
Pin No.
1
7
- 21 -
39
1
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
Hardware Installation Process