Gigabyte GA-8S661GXM-775 User Manual page 67

(3) Configuring RAID set in RAID BIOS
Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if
you do not want to create RAID.
Step 1:
After the POST memory test begins and before the operating system boot begins, look for a message
which says "Press <Ctrl>+<S> to enter Setup Menu or <ESC> to skip waiting" (Figure 4). Hit CTRL+S
to enter the RAID BIOS setup utility. If you cannot enter the RAID BIOS correctly, assure that your SATA
drives are properly installed.
Silicon Integrated Systems Corp. RAID BIOS Setting Utility v1.05_964
(c) 2003-2005 Silicon Integrated Systems Corp. All Rights Reserved.
Press <Ctrl><S> to enter Setup Menu or <ESC> to skip waiting.
Primary Master:
Secondary Master:
Step 2:
Press CTRL+S. The SiS RAID BIOS Setting Utility - Disk Status window appears (Figure 5). To
create RAID, press R to enter the RAID Setup utility.
SiS RAID BIOS Setting Utility
* Current Created Raid *
[R] : Enter Raid setup utility
[Q] : Exit current menu
Location Model
Disk 1 ST3120026AS
Disk 2 ST3120026AS
ST3120026AS 111GB
ST3120026AS 111GB
Figure 4
Disk Status
Capacity Mode
111GB UDMA 6
111GB UDMA 6
Figure 5
- 67 -
UDMA6
UDMA6
RAID Type
Single
Single
Appendix