Table of Contents
Advertisement
26) WOL (Wake On LAN)
This connector allows the remote servers to m anage this system via your network adapter which
supports WOL. Be careful with the polarity of the WOL connector. Check the pin assignm ent
carefully while you connect the WOL cable, incorrect connection between the cable and connector
will make the device unable to work or even damage it. For optional WOL cable, please contact
your local dealer.
27) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily
shor 1-2 pin. Default doesn't include the "Shunter" to prevent from im proper use this jumper.
GA-8KNXP Ultra-64 Motherboard
Pin No.
1
Open: Normal
1
Short: Clear CMOS
1
- 34 -
Definition
1
+5V SB
2
GND
3
Signal
Advertisement
Table of Contents
