Gigabyte GA-8IPE775 Series User Manual page 63

2. Move to the BIOS file you want to flash and press Enter.
In this example, we only download one BIOS file to the floppy disk so only one BIOS file,
8KNXPU.Fba, is listed.
Please confirm again you have the correct BIOS file for your motherboard.
Boot From......................................... Main Bios
Main ROM Type/Size.............................SST 49LF003A
Backup ROM Type/Size.........................SST 49LF003A
Wide Range Protection Disable
8KNXPU.Fba
Auto Recovery Enable
Halt On Error Disable
Total size: 1.39M
Copy Main ROM Data to Backup
F5 : Refresh
Load Main BIOS from Floppy
Load Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
Enter : Run :Move
After pressing Enter, you'll then see the progress of reading the BIOS file from the floppy disk.
Boot From......................................... Main Bios
Main ROM Type/Size.............................SST 49LF003A
Backup ROM Type/Size.........................SST 49LF003A
Wide Range Protection Disable
Auto Recovery Enable
Reading BIOS file from floppy... Halt On Error Disable
>>>>>>>>>>>>...................... Copy Main ROM Data to Backup
Don't Turn Off Power Or Reset System
Load Main BIOS from Floppy
Load Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
Enter : Run :Move
After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?"
3. Press Y button on your keyboard after you are sure to update BIOS.
Then it will begin to update BIOS. The progress of updating BIOS will be displayed.
Please do not take out the floppy disk when it begins flashing BIOS.
Dual BIOS Utility
Boot From Main Bios
1 file(s) found
512K
Free size: 911.50K
Load Default Settings DEL : Delete
Save Settings to CMOS
Q-Flash Utility
ESC:Reset F10:Power Off
Dual BIOS Utility
Boot From Main Bios
Load Default Settings
Save Settings to CMOS
Q-Flash Utility
ESC:Reset F10:Power Off
- 59 -
512K
512K
BIOS file in the floppy disk.
512K
512K
Do not trun off power or reset your
system at this stage!!
Technical Reference