Table of Contents
Advertisement
Midi Port IRQ
5
Set Midi Port IRQ to 5.
10
Set Midi Port IRQ to 10. (Default value)
CIR Port Address
310
Set CIR Port Address to 310.
320
Set CIR Port Address to 320.
Disabled
Disable this function. (Default value)
CIR Port IRQ
5
Set CIR Port IRQ to 5.
11
Set CIR Port IRQ to 11. (Default value)
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
ACPI Suspend Type
Power LED in S1 state
Off by Power button
PME Event Wake Up
ModemRingOn/WakeOnLan
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC Back Function
: Move
Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR)
Set ACPI suspend type to S3/STR(Suspend To RAM).
Power LED in S1 state
Blinking
In standby mode(S1), power LED will blink. (Default value)
Dual/OFF
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Power Management Setup
[S1(POS)]
[Blinking]
[Instant-off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value
F10: Save
F6: Fail-Save Default
F7: Optimized Defaults
- 43 -
Item Help
Menu Level
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
ESC: Exit
F1: General Help
BIOS Setup
Hide quick links:
Advertisement
Table of Contents
