Gigabyte GA-8IG1000 Pro-G User Manual page 43

Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the
computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type
which will automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
Capacity
Access Mode
Cylinder
Head
Precomp
Landing Zone
Sectors
If a hard disk has not been installed select NONE and press <Enter>.
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the
computer.
None
360K, 5.25"
1.2M, 5.25"
720K, 3.5"
1.44M, 3.5"
2.88M, 3.5"
The hard disk size. The unit is MegaBytes.
The options are: Auto / Large / LBA / Normal.
The cylinder number of hard disk.
The read /write head number of hard disk.
The cylinder number at which the disk driver changes the write current.
The cylinder number that the disk driver heads(read/write) are seated when
the disk drive is parked.
The sector number of each track define on the hard disk.
No floppy drive installed
5.25 inch PC-type standard drive; 360K bytes capacity.
5.25 inch AT-type high-density drive; 1.2M bytes capacity
(3.5 inch when 3 Mode is Enabled).
3.5 inch double-sided drive; 720K bytes capacity
3.5 inch double-sided drive; 1.44M bytes capacity.
3.5 inch double-sided drive; 2.88M bytes capacity.
- 39 - BIOS Setup