Table of Contents
Advertisement
Step 2: Install memory modules
The motherboard has 3 dual inline memory module(DIMM) sockets. The BIOS will automatically
detects memory type and size. To instal l the memory module, just push it vertically into t h e DIMM Slot.
The DIMM module can only fit in one direction due to the notch. Memory size can vary between
sockets.
Total Memory Sizes With Unbuffered DDR DIMM
Devices used on DIMM
1 DIMMx64/x72
64 Mbit (2Mx8x4 banks)
128 MBytes
64 Mbit (1Mx16x4 banks)
64 MBytes
128 Mbit(4Mx8x4 banks)
256 MBytes
128 Mbit(2Mx16x4 banks)
128 MBytes
256 Mbit(8Mx8x4 banks)
512 MBytes
256 Mbit(4Mx16x4 banks)
256 MBytes
512 Mbit(16Mx8x4 banks)
1 GBytes
512 Mbit(8Mx16x4 banks)
512 MBytes
M When STR/DIMM LED is ON, do not install/remove DIMM from socket.
M Please note that the DIMM module can only fit in one direction due to
the one notches. Wrong orientation will cause improper installation.
Please change the insert orientation.
GA-7VAX/GA-7VAXP Motherboard
2 DIMMsx64/x72
256 MBytes
128 MBytes
512 MBytes
256 MBytes
1 GBytes
512 MBytes
2 GBytes
1 GBytes
DDR
1. The DIMM slot has a notch, so the
DIMM memory module can only fit in one direction.
2. Insert the DIMM memory module verticallyinto the
DIMM slot. Then push it down.
3. Close the plastic clip at both edges of theDIMM slots
to lock the DIMM module.
M Reverse the installationsteps when you wish to
remove the DIMM module.
- 12 -
3 DIMMsx64/x72
384 MBytes
192 MBytes
768 MBytes
384 MBytes
1.5 GBytes
768 MBytes
3 GBytes
1.5 GBytes
Advertisement
Table of Contents
