Table of Contents
Advertisement
STEP 6: Load BIOS defaults.
Normally the system redetects all devices after BIO S has been upgraded. Therefore, we
highly recommend reloading the BIO S defaults after B IOS has been upgraded. This
important step resets everything after the flash.
(1) Take out the floppy diskette from floppy drive, and then restart the system. The boot up
screen will indicate your motherboard model and current B IOS version.
(2) Don't forget to press <DE L> key to enter BIOS setup again when system is boot up. Use the
arrows to highlight the item "LOAD SETUP DE FAULTS" then press "Enter". System will ask
"Load Setup Defaults (Y/N)?" Press "Y" and "Enter" keys to confirm.
AMIBI O S SIMPLE SETUP UTILITY - VERSION 1.24b
(C) 2001 Ameri c an Megatrends, Inc. All Rights Reserv ed
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP / PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ESC: Quit
hifg : Select Item
F6: Load BIOS Defaults
INTEGRATED PERIPHERALS
HARDWARE MONITOR & MISC SETUP
SUPERVISOR PASSWORD
USER PASSWORD
Load Setup Defaults? (Y/N )?N
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
(Shi f t)F2 : Change Color
F7: Load Setup Defaults
Load Setup Defaults
- 67 -
F5: Old Values
F10:Sav e & Ex it
Technical Reference
Advertisement
Table of Contents
