Table of Contents
Advertisement
34
Using Your Gateway Solo 3150 Notebook
5.
Remove the two screws that secure the hard disk drive.
Pull the drive straight out.
6.
To replace the hard disk drive
Make sure the power is turned off, the AC power is disconnected, and
1.
the battery is removed.
2.
Slide the new drive firmly into the bay, then secure the drive with the
two screws.
3.
Turn the notebook over, connect the AC adapter, and insert the battery.
Start up the system. If this is a first-time installation, follow the
4.
information that accompanied the drive to prepare it for use.
Advertisement
Table of Contents
