Advertisement
Quick Links
MT1900-NL HANDLE
DISASSEMBLY
INSTRUCTIONS
Recommended Tools Needed:
•
2 MM Hex Driver or Allen Wrench
•
Vise-Grip Pliers
•
24 MM Socket and Wrench
•
Electrical Tape/Cloth
DETAIL A
SCALE 4 : 5
8/1/2024
FOR WARRANTY INFO PLEASE VISIT WWW.MOUNTAINPLUMBING.COM/WARRANTY-CLAIMS
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.mountainplumbing.com
1.
COVER VICE-GRIP
PLIER'S TEETH WITH
ELECTRICAL
TAPE/CLOTH TO
PREVENT FISHISH
DAMAGE.
2.
GRIP LOCK COVER
WITH VICE-GRIP AND
UNSCREW AND
REMOVE(NOTE: BE
AWARE THAT IT IS
SPRING LOADED)
3.
REMOVE LOCKBAR
AND SPRING AND
SET ASIDE
WARRANTY
888-222-9140
fax 972-456-2719
A
MT1900-NL Handle Disassembly
Page 1
Advertisement
Related Manuals for McAlpine Mountain Plumbing Products MT1900-NL
Summary of Contents for McAlpine Mountain Plumbing Products MT1900-NL
- Page 1 MT1900-NL HANDLE DISASSEMBLY INSTRUCTIONS Recommended Tools Needed: • 2 MM Hex Driver or Allen Wrench • Vise-Grip Pliers • 24 MM Socket and Wrench • Electrical Tape/Cloth COVER VICE-GRIP PLIER'S TEETH WITH ELECTRICAL TAPE/CLOTH TO PREVENT FISHISH DETAIL A SCALE 4 : 5 DAMAGE.
- Page 2 MT1900-NL HANDLE DISASSEMBLY INSTRUCTIONS REMOVE THE 2MM SET SCREW AND DETATCH HANDLE COVER TO EXPOSE CARTRIDGE AND LIMIT RING. PARTIALLY UNSCREW OR FULLY REMOVE THE THREE 2MM SET SCREWS TO ALLOW THE REMOVAL OF LIMIT RING. WARRANTY FOR WARRANTY INFO PLEASE VISIT WWW.MOUNTAINPLUMBING.COM/WARRANTY-CLAIMS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE www.mountainplumbing.com 888-222-9140...
- Page 3 MT1900-NL HANDLE DISASSEMBLY INSTRUCTIONS USE A 22MM SOCKET AND A WRENCH TO UNSCREW AND REMOVE THE CARTIDGE NUT (EXTENSIVE FORCE WILL BE NEEDED DUE TO IT BEING GLUED) NOW THE CARTRIDGE IS ACCESSABBLE FOR IT TO BE REMOVED AND REPLACED. WARRANTY FOR WARRANTY INFO PLEASE VISIT WWW.MOUNTAINPLUMBING.COM/WARRANTY-CLAIMS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE...
- Page 4 MT1900-NL HANDLE DISASSEMBLY INSTRUCTIONS REPEAT PRIOR STEPS IN REVERSE TO ASSEMBLE FACUET HANDLE BACK TOGETHER. NOTE: TO ENSURE SMOOTH HANDLE OPERATION, THE LIMIT RING WOULD ENSURE SCREW HOLE IS NEED TO BE CENTERED AND POINTING UP PROPERLY ALIGNED AND ADJUSTED TO THE POSITION SHOWN TO ALLOW LOCK BAR MOVMENT.
Need help?
Do you have a question about the Mountain Plumbing Products MT1900-NL and is the answer not in the manual?
Questions and answers