Page 2
2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices ---------------6 2.2. Precaution of Laser Diode -------------------------------7 2.3. Service caution based on Legal restrictions---------8 2.4. Handling Precautions for Traverse Unit --------------9 3 Service Navigation---------------------------------------------- 11 3.1. Service Information -------------------------------------- 11 3.2.
1 Safety Precautions 1.1. GENERAL GUIDELINES 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.
• No sound is heard when the power is turned on. • Sound stops during a performance. The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are “shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used. If this occurs, follow the procedure outlines below: 1.
1.6. Caution for AC Cord (For Saudi Arabia and Kuwait) WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER ("GS" area code model only) E, BY THE EARTH SYMBOL OR COLOURED GREEN OR For your safety, please read the following text carefully.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip”...
2.2. Precaution of Laser Diode Caution: This product utilizes a laser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens. Wavelength: 655 nm (DVD)/785 nm (CD) Maximum output radiation power from pickup: 100 µW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings: 1.
2.3. Service caution based on Legal restrictions 2.3.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).
2.4. Handling Precautions for Traverse Unit The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit. Cautions to Be Taken in Handling the Optical Pickup Unit 2.4.1.
Page 10
2.4.2.2. Human body grounding 1. Use the anti-static wrist strap to discharge the static electricity form your body. Figure 2...
3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.
R2865 D0GB682JA008 (GC/GS) D0GB682JA008 D0GB103JA008 (GA) R6939 ERJ6GEYJ2R7V D0GDR00JA017 R6940 ERJ6GEYJ2R7V D0GDR00JA017 R8000 D0GB154JA008 (GC/GS) D0GB563JA008 D0GB181JA008 (GA) 3.3. Notes: —This service manual contains technical information which will allow service personnel’s to understand and service this model. —If the circuit is changed or modified, this information will be followed by supplement service manual to be filled with the original service manual.
Certified to the DivX 330 W Home Theater Profile. PMPO Output power: *7 MPEG4 data recorded with the Panasonic SD multi cameras or DVD video recorders. 2800 W Conforming to SD VIDEO specifications (ASF standard)/ DIN Output Power: Dolby Digital Mode MPEG4 (Simple Profile) video system/G.726 audio system.
JK7002 JK6701 ZJ5803 USB P.C.B.) *TL1 CN2016 *H5801 (PANEL P.C.B.) CN6703 *TL4 VR6901 FL6801 *TL3 ZJ5801 *WIRE *TL2 CLAMPER (SMPS P.C.B.) SA-PT170GS-K1 FOR SC-PT175GS-K CABINET DRAWINGS NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY.
Page 23
8.1.2. Packaging ACCESSORIES BAG REMOTE CONTROL A1-1 R/C BATTERY COVER **SPACER PAD AC CORD OI BOOK SA-PT170GS FM INDOOR ANTENNA SB-PT175EP A5 VIDEO CABLE SPEAKER LABEL SCREW F R O N T POLYFOAM (FRONT) POLYFOAM (REAR) NOTE: "**" PARTS ARE NOT SUPPLIED.
8.2. Electrical Replacement Part List Safety Ref. Part No. Part Name & Qty Remarks Description Safety Ref. Part No. Part Name & Qty Remarks D2602 MA2J1110GL DIODE Description D2751 MA2J1110GL DIODE PRINTED CIRCUIT D2752 MA2J1110GL DIODE BOARDS D2753 MAZ8051GML DIODE PCB1 RFKBX0681A-M DVD MODULE P.C.B...
Need help?
Do you have a question about the SA-PT170GS and is the answer not in the manual?
Questions and answers