Table of Contents
Advertisement
Chapter 2. Installation Guide
2.1 Hardware Installation
There are two ways to install the Adapter:
1. Plug the Adapter directly to the USB port on your computer.
2. Connect the Adapter and your computer through the USB cable attached in package.
Note:
The promoted Found New Hardware Wizard screen will pop up when the adapter is installed
correctly. Click Cancel.
2.2 Software Installation
The Setup steps for Windows 2000 and XP are similar with each other. This user guide takes
Windows XP for example.
2.2.1 For Windows XP
1.
Insert the Resource CD into your CD-ROM drive, and the Figure 2-1 will appear. To continue,
select the TL-WN721N.There will be a menu including: Install Driver&Utility, QSS
Installation and User Guide.
TL-WN721N
150Mbps Wireless N USB Adapter
Figure 2-1
4
Advertisement
Table of Contents
