Table of Contents
Advertisement
Chapter 2. Installation Guide
2.1 Hardware Installation
There are two ways to install the Adapter:
1. Plug the Adapter directly to the USB port on your computer.
2. Connect the Adapter and your computer with the extension USB cable attached in package.
Note:
Once the Adapter is firmly in place, the Found New Hardware Wizard screen will pop up.
2.2 Software Installation
2.2.1 Overview
The Adapter's Setup Wizard will guide you through the installation of the Utility and drivers.
Before installing the software, please plug the adapter into your PC. After that, you will be
prompted "Found New Hardware Wizard", click the Cancel button, and run the Setup Wizard
program on the CD-ROM.
The Setup steps for Windows 2000, XP and Vista are very similar, so the following installation
guide takes Windows XP for example.
2.2.2 Software Installation for Windows XP
Step 1: When Found New Hardware Wizard is prompted, click Cancel. Then insert the
Resource CD into your CD-ROM drive, and open the folder named TL-WN323G. To
continue, choose the proper folder according to your operating system and double-click
Setup.exe to load the following screen. Click Cancel to end the installation in the screen.
Otherwise, the installation will continue.
TL-WN323G
54M Wireless USB Adapter User Guide
3
Advertisement
Table of Contents
