Table of Contents
Advertisement
Using the Smartwizard Discovery Utility
This section leads you through the steps necessary to begin managing your GS748T Smart Switch.
It covers how to install in a network that contains a DHCP server and one without DHCP.
Network with DHCP server
To install the switch in a network with a DHCP server, proceed as follows:
1. Connect the GS748T switch to a DHCP network.
2. Power on the switch by connecting its power cord.
3. Install the Smartwizard Discovery Utility program on your computer.
4. Start the Smartwizard Discovery utility.
5. Click Discover for the Smartwizard Discovery to find your GS748T Smart Switch. You
should see a screen similar to that shown below.
Figure 2-1
v1.0, October 2007
Chapter 2
2-1
Advertisement
Table of Contents
