Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Xtool S1
Summary of Contents for Xtool S1
- Page 1 S1 Screen Printing Kit Educ tor Guide...
- Page 3 Introduction...
-
Page 7: Getting Started
Getting Started... - Page 9 (3) Align the locating pin on the back of the laser module to the hole on the linear guide block. Attach the laser module to the linear guide block. After inserting the locating pin, slightly lower the laser module to lock the locating pin into the slot. xTool S1 Screen Printing it Educator Guide...
- Page 10 Align the two protruding points on the back of the distance sensor to the holes on the right panel of the laser module. Then, guide the distance sensor toward the laser module until it attaches magnetically to the laser module. xTool S1 Screen Printing it Educator Guide...
- Page 15 (2) Get the coated screen with the side of the corrugated board facing down. (3) Fit the screen into the frame and make sure the four corners are all in place and the screen is centered in the frame. xTool S1 Screen Printing it Educator Guide...
- Page 16 (5) Get the four tensioning strips. Fit one into a side groove and tighten the related wrenches. Move on to the rest of the strips until all four sides of the screen are stretched. (6) Position the fixing pin properly before you rotate it to secure it. xTool S1 Screen Printing it Educator Guide...
- Page 18 New project...
- Page 19 (2) Use the USB cable to connect xTool S1 to your computer. (3) On the top of the project editing page, click the name of the device > select Connect device. (4) On the pop-up window, click the name of your device to connect to it.
- Page 28 (3) In the upper-right corner of XCS, click Start. (4) Close the lid of xTool S1. Then, press the button on xTool S1 to start processing. Printing (1) Align the three magnetic pieces on the back of the magnetic board with the magnets on the printer.
- Page 30 Alternatively, you can press the frame on an edge and hold it down during printing. (6) Use the ink spatula to get enough ink on the screen and use the squeegee to squeeze out the ink quickly to avoid transferring too much ink. xTool S1 Screen Printing it Educator Guide...
- Page 31 Material Settings Library.
- Page 32 Visit the xTool Material Settings Library. Select your machine model. On the top right corner, scroll down the "Material Type" list to locate and select "Screen Printing". xTool S1 Screen Printing it Educator Guide...
- Page 35 On the homepage, you can: ‘j Log in to your xTool account. Some functions, such as xArt and Cloud services, may require you to log inj uj Go to the homepage. When you are using your Cloud space, you can click to go back to the homepagej ‡j Open your Cloud space.
- Page 40 25 4...
- Page 41 Engraver Specs Line Densi y "A " "M "...
- Page 43 Classroom Projects...
- Page 46 & &...
- Page 54 Resources...
Need help?
Do you have a question about the S1 and is the answer not in the manual?
Questions and answers