Connecting The Speakers - JBL CINEMA 300 Quick Start Manual

CONNECTING THE SPEAKERS

CAUTION: Before making speaker connections, be sure that your receiver or amplifier is turned off and preferably that its AC cord is
unplugged from the AC power outlet.
Connect the speakers to your receiver or amplifier:
1.
2.
3.
Connect the speakers to the proper amplifier channels:
Front Left
Wire with
White Bands
Surround Left
Wire with
Blue Bands
IMPORTANT: Make sure the ( + ) and ( – ) bare wires do not touch each other or the other terminal. Touching wires can cause a short
circuit that can damage your receiver or amplifier.
Connect the speaker's "+" terminal to the amplifier's "+" terminal:
Colored Band
to "+" Terminal
Center
FRONT
– +
LEFT
– +
SURROUND
Speaker
to "+" Terminal
Wire with
Green Bands
Wire with
Red Bands
– + – +
RIGHT CENTER
– +
Receiver
or Amplifier
Wire with
Colored Band
to "+" Terminal
Amplifier
SPEAKER
OUTPUT
Wire with
Colored Band
Front Right
Surround Right
www.jbl.com
5