ProBreeze PB-D-26 Quick Start Manual

Turning On/Off To Turn On:
1. Plug in the dehumidifier. It will beep once.
2. Press the power button. The dehumidifier will beep once, and the
power indicator light will turn on.
To Turn Off:
1. Press the power button again. The power indicator light will turn off.
Note: When the indoor humidity reaches the target value, the
compressor will stop running, and the indicator light will flash.
Selecting a 1. Plug in and turn on the dehumidifier.
Mode
2. Press the humidity setting button repeatedly to cycle through the
modes:
Continuous Dehumidification Mode:
• Default mode when plugged in.
• Laundry Drying Tip: Press the fan speed button to set the fan to high
for efficient drying. Place the dehumidifier near the laundry in a
well-ventilated room.
Relative Humidity Mode:
• Press the humidity setting button to cycle from 30% and 90% in 5%
increments.
• Compressor turns off if ambient humidity is 3% below the set target
and restarts if it's 3% above the target.
Automatic Dehumidification Mode:
• Below 5°C: Compressor off.
• 5°C - 20°C: Target humidity set to 60%.
• 20°C - 27°C: Target humidity set to 55%.
• Above 27°C: Target humidity set to 50%.
Setting the Fan Adjust Fan Speed:
1. While the dehumidifier is on, press the fan speed button repeatedly
Speed
to cycle through low and high fan speed options.
2. The corresponding indicator light (high or low fan speed) will turn
on.
Setting a Turn-
1. Plug in the dehumidifier.
2. Press the timer button repeatedly to cycle through 1 to 24-hour
On Timer
options.
3. When the display stops flashing, the timer is set. The timer indicator
light will be on.
4. The dehumidifier will turn on when the set time elapses.
5. To cancel, press the power button at any point.
QUICK START GUIDE
COMPRESSOR DEHUMIDIFIER
MODELS PB-D-26/PB-D-27