Subscribe to Our Youtube Channel
Related Manuals for ProBreeze PB-18
Summary of Contents for ProBreeze PB-18
- Page 1 Instruction Manual Model PB-18 12L Compressor Dehumidifier IMPORTANT INSTRUCTIONS - RETAIN FOR FUTURE USE...
-
Page 2: Safety Instructions
12L COMPRESSOR DEHUMIDIFIER MODEL PB-18 Thank you for choosing to purchase a product from Pro Breeze. Please read the entire manual carefully prior to first use and keep in a safe place for future reference. SAFETY INSTRUCTIONS continuously supervised. ― ―... -
Page 3: Risk Of Fire
Do not pull on the power cord. Never and how to get the best out of your unit, visit move, carry, or hang the appliance by our advice blog at www.probreeze.com. the power cord. • Do not kink or wrap the power cord... -
Page 4: Specification
R290 is a refrigerant gas that complies SPECIFICATION with the European directive on the ― ― environment. • Do not puncture any part of refrigerant • Model: PB-18 circuit. • Voltage: 220-240V~ • Be aware R290 refrigerant is odourless • Frequency: 50Hz and does not have the odour normally •... -
Page 5: Positioning Your Unit
EXPLANATION OF SYMBOLS DISPLAYED ON THE UNIT ― ― The symbol shows that this appliance uses a flammable WARNING refrigerant. If the refrigerant leaks and is exposed to an external ignition source, there is a risk of fire. This symbol shows that the operation manual should be CAUTION read carefully. - Page 6 10. Tank Full Indicator 11. Lock Indicator HUMIDITY turn on and 3 seconds later the compressor will start working. The appliance will automatically turn off if Power button • the environment’s humidity is 3% lower than the set humidity. You can adjust the Standby mode: fan speed and humidity settings in this As you plug the appliance into the power...
- Page 7 Long press the humidity button to view child lock. All buttons on the appliance the current room temperature on the will be locked and the child lock LED display. After 5 seconds, the LED indicator will be on. display will revert to the current humidity. To remove child lock, press the lock LED display •...
-
Page 8: Continuous Draining
ERROR CODES ― ― ERROR CODE CAUSE SOLUTION The wiring has Contact Pro Breeze Customer Care by sending an email to help@probreeze.com malfunctioned. or via our website www.probreeze.com The humidity sensor is unable to detect the humidity of the environment. - Page 9 CAUTION: DO NOT USE ANY • If needed, wash the filter with water and ABRASIVE CLEANERS OR SOLVENTS, a soft detergent. Dry thoroughly before AS THIS CAN DAMAGE THE putting back in the unit. APPLIANCE. • Ensure the filter is completely clean and dry before returning it to the unit.
-
Page 10: Troubleshooting
TROUBLESHOOTING ― ― If you experience any issues with this product, please try these troubleshooting tips. If the issue is not solved, please contact our customer care team by emailing help@probreeze.com PROBLEM WHAT TO CHECK: The appliance • Ensure the appliance is properly plugged into the power supply. - Page 11 English | 10...
- Page 12 One Retail Group, Ryland House 24a Ryland Road, London, NW5 3EH, United Kingdom EU Authorised Representative: Brandrep Limited, The Black Church St Mary's Pl N, Dublin, D07 P4AX, Ireland © Copyright 2021...
Need help?
Do you have a question about the PB-18 and is the answer not in the manual?
Questions and answers
Where is the air filter and how can I remove it?