Advertisement
Quick Links
Installation and Service Instructions
Stopper
Station Series
®
Push Button with Pneumatic Timer Button
Models SS2xx8
ADA
Compliant
ADA
Compliant
Safety Notice to Installers and Users
This push button has been tested according to UL508. Non-fire alarm initiating devices are listed in UL category
NRNT. It is important to read, understand and follow all instructions provided with this product. It is the installer's
responsibility to comply with NEC, Canadian Electrical Code, mounting specifications according to ADA and
other applicable fire and electrical codes. After installation and testing are complete, provide a copy of this
manual to all personnel responsible for testing and maintenance of this product. To avoid electrical shock, DO
NOT attempt to install this product when power is on.
Note: To reduce potential risk, STI discourages use of a pneumatic timer button as an emergency power
disconnect or any control that may restart automatically at the end of the timing sequence.
L'ess ai de ce bouton-poussoir a été réalisé selon UL508. Les dispositifs de déclenchement d'alertes non
incendie sont répertoriés sous la catégorie UL NRNT. Il est important de lire, de comprendre et de suivre
toutes les instructions fournies avec ce produit. Il incombe à l'installateur de se conformer aux normes NEC,
Code canadien de l'électricité, aux specifications de montage selon l'ADA et aux autres codes de prévention
des incendies et de l'électricité en vigueur. Pour éviter un choc électrique, NE tentez PAS d'installer ce produit
lorsqu'il est sous tension. Une fois l'installation et les essais terminés, vous devez fournir une copie de ce
manuel à l'ensemble du personnel chargé de l'essai et de l'entretien de ce produit.
Note: Pour réduire un risque potentiel, STI déconseille d'utiliser le bouton-poussoir phéumatique temporisé,
pour la déconnexion d'alimentation de secours ou tout autre contrôle qui peut être réinitialisée automatiquement
à la fin de la séquence de temporisation.
We protect the things that protect you.
®
Advertisement
Related Manuals for Safety Technology International Stopper Station Series
Summary of Contents for Safety Technology International Stopper Station Series
- Page 1 Installation and Service Instructions Stopper Station Series ® Push Button with Pneumatic Timer Button Models SS2xx8 Compliant Compliant Safety Notice to Installers and Users This push button has been tested according to UL508. Non-fire alarm initiating devices are listed in UL category NRNT.
- Page 2 Contact Rating One set NO and one set NC Rated at 10 AMP @ 240 VAC Recognized Component listing is 1,000,000 cycles Operating Temperature of button 15° to 120°F (-9° to 49°C) Contact Diagram CONNECTION AND LEAD WIRE INSTALLATION NOTES COLOR CODE 1.
- Page 3 Housing Installation PULL BOTTOM OF SHELL OUT AND LIFT UP UNTIL BUTTON AND SWITCH ASSEMBLY TABS ARE RELEASED FROM SLOTS IN TOP OF SWITCH ASSEMBLY. ONCE INSTALLATION IS COMPLETE, SECURE SHELL WITH SCREW AND HEX WRENCH (SHOWN). SWITCH SHELL ALLEN HEAD SCREW 3/32”...
- Page 4 MODELS KIT-71100A-COLOR Dimensions WITHOUT BACK BOX BACKBOX (OPTIONAL) 1.62 in. 1.62 in. 1.58 in. 1.62 in. 1.62 in. (41mm) 1.62 in. 1.58 in. 3.22 in. (41mm) (40mm) (41mm) 3.22 in. (41mm) 3.22 in. (41mm) (40mm) (82mm) (82mm) 1.37 in. (82mm) 1 in.
Need help?
Do you have a question about the Stopper Station Series and is the answer not in the manual?
Questions and answers