Safety Technology International G3 3-IN-1 Series Manual

COM IN COM OUT
F
TO NEXT
A
INITIATING DEVICE
OR
C
EOL RESISTOR
P
N.O. IN N.O. OUT
MOUNTING HOLE KEY SCREW SIZE REQUIRED
KIT-GLR-BB-R #10 x 3/4 in. pan-sms
Four square box #8-32 x 1.0 in. machine screw
B
Camera model surface mount version shown
#6-32 x 1.0 in. machine screw
Double gang box
60.3mm European box M3.5 x 35mm machine screw
Single gang box #6-32 x 1.0 in. machine screw
FRAME MOUNTS TO:
• Single gang box
• Double gang box
• Four square box
• 60.3 mm European box
• KIT-GLR-BB-GY
RESET
Key
used drill
4 in. deep
4.12 in.
(104.8 mm)
not used drill
eep
2.06 in.
CR123A Lithium battery
Volume Jumper
Box
(52.4 mm)
with 1/2 in. NPT thread
d bottom
s with camera
FC-BB
s without camera
FA-BB
HI LOW Volume Jumper
5.43 in.
HIGH
(137.8 mm)
(default)
3
4
w
urface
ption
(137.8 mm)
HI LOW
5.43 in.
LOW
(137.8 mm)
2.9 in.
(73mm)
mera user manual
e
Reset lever
er
Lower rotating disc must be visible
Key-to-reset screw position
RESET
USA
FRAME MOUNTS TO:
• Single gang box
• Double gang box
• Four square box
• 60.3 mm European box
• KIT-GLR-BB-R
Installation Components
FRAME MOUNTS TO:
4.125 in.
Drill (4) 11/64 in. holes • Single gang box
(104.77 mm)
for general wall mount • Double gang box
• Four square box
2.65 in.
When anchors are used drill
0.61 in. • 60.3 mm European box
(67.3 mm)
3/16 dia. holes 1-1/4 in. deep
(15.5 mm) • KIT-GLR-BB-R
1/2 in. NPT Thread
When anchors are not used drill
7/64 dia. 1-1/4 in. deep
1.95 in.
Back Box
(49.5 mm)
Red with 1/2 in. NPT thread
top and bottom
1.75 in. Key
1.48 in.
Models with camera
(44.5 mm)
(37.6 mm)
KIT-GFC-BB
Models without camera
KIT-GFA-BB
4.05 in.
(102.9 mm)
#8 x 1.5 in, sheet metal screw
Key used to mount back box to surface
Drill (2) 9/64 in. holes (4) provided with back box option
to mount to standard
single gang box 1/2 in. NPT plug
(2) provided with back box option
#10 x 3/4 in. phillips pan head screw
used to attach frame to back box
(4) provided with back box option
Key
Mounting hardware included with
flush mount version
(2) #6-32 x 1.0 in.
Push button operating element
(OPTIONAL CAMERA)
See camera operation manual
MOUNTING HOLE KEY
Pre Activation Alarm
MOUNTING HOLE KEY
KIT-GLR-BB-R
KIT-GLR-BB-R
4.12 in.
(104.8 mm) Four square box
Four square box
Wire size:
Double gang box
14-30 AWG
2.06 in.
Double gang box
60.3mm European box
Strip wires:
(52.4 mm)
Button lever
1/4 in. (6-7mm)
Single gang box
60.3mm European box
*Mylar Sound and LED PCB
Detail A
Screw
Single gang box
MOUNTING HOLE KEY SCREW SIZE REQUIRED
4.12 in.
Button
(104.8 mm) #10 x 3/4 in. pan-sms
KIT-GLR-BB-GY
Four square box #8-32 x 1.0 in. machine screw
2.06 in.
Double gang box #6-32 x 1.0 in. machine screw
(52.4 mm)
60.3mm European box
M3.5 x 35mm machine screw
Single gang box #6-32 x 1.0 in. machine screw
Detail A
2.9 in.
(73mm)
A
5.43 in.
*Remove Mylar for sounder activation
2.9 in.
NC NO COM
(73mm)
WARNING: This product can expose you to chemicals including Dichloromethane, which is known to the State
of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Three year warranty or a one year limited warranty (from date of purchase) on most products. See website for
details. Electronic warranty form at www.sti-usa.com/wc14.
All specifications and information shown were current as of publication and are subject to change without notice.
Momentary screw position
When anchors are used drill
3/16 dia. holes 1-1/4 in. deep
1/2 in. NPT Thread
When anchors are not used drill
7/64 dia. 1-1/4 in. deep
#10 x 3/4 in. phillips pan head screw
1/2 in. NPT Thread
used to attach frame to back box Recommended mounting height is measured from
0.74 in. (4) provided with back box option
the center of the push button to the floor level:
(18.7 mm)
Mounting hardware included with
• 1. ADA/NFPA 101: 34 in. - 48 in.
flush mount version
• 2. European: 1.2 m - 1.6 m
1.08 in.
(2) #6-32 x 1.0 in.
(27.4 mm)
NOTE: verify and comply with local AHJ
Push button operating element RESET
(OPTIONAL CAMERA)
#8 x 1.5 in, sheet metal screw
used to mount back box to surface
See camera operation manual
1
(4) provided with back box option
3.281 in. 5.43 in.
1/2 in. NPT plug
2
(83.34 mm) (137.8 mm)
(2) provided with back box option
#10 x 3/4 in. phillips pan head screw
used to attach frame to back box
#8 x 1.5 in, sheet metal screw
(4) provided with back box option
used to mount back box to surface
Mounting hardware included with
(4) provided with back box option
flush mount version
(2) #6-32 x 1.0 in.
1/2 in. NPT plug
(2) provided with back box option
Push button operating element
(OPTIONAL CAMERA)
#10 x 3/4 in. phillips pan head screw
See camera operation manual
used to attach frame to back box
(4) provided with back box option
5.43 in.
Mounting hardware included with
(137.8 mm)
flush mount version
(2) #6-32 x 1.0 in.
Push button operating element
(OPTIONAL CAMERA)
See camera operation manual
COM IN COM OUT
F
TO NEXT
A
INITIATING DEVICE
OR
C
SCREW SIZE REQUIRED
EOL RESISTOR
P
SCREW SIZE REQUIRED #10 x 3/4 in. pan-sms
N.O. IN N.O. OUT Camera accessory
Camera reset button
#10 x 3/4 in. pan-sms relay cable access
Drill (4) 11/64 in. holes
#8-32 x 1.0 in. machine screw
#8-32 x 1.0 in. machine screw
for general wall mount
#6-32 x 1.0 in. machine screw
#6-32 x 1.0 in. machine screw
M3.5 x 35mm machine screw
0.61 in.
#6-32 x 1.0 in. machine screw
M3.5 x 35mm machine screw (15.5 mm)
MOUNTING HOLE KEY SCREW SIZE REQUIRED
#6-32 x 1.0 in. machine screw
#10 x 3/4 in. pan-sms
KIT-GLR-BB-R
Drill (4) 11/64 in. holes
Four square box #8-32 x 1.0 in. machine screw
for general wall mount
FRAME MOUNTS TO:
Double gang box #6-32 x 1.0 in. machine screw
1.95 in.
RESET • Single gang box
60.3mm European box M3.5 x 35mm machine screw
(49.5 mm)
0.61 in.
• Double gang box
Single gang box #6-32 x 1.0 in. machine screw
(15.5 mm)
1.75 in.
• Four square box
(44.5 mm) (37.6 mm)
• 60.3 mm European box
• KIT-GLR-BB-GY
4.05 in.
RESET
1.95 in.
(102.9 mm)
RESET
(49.5 mm)
1.75 in.
(44.5 mm)
Reset lever slide
Reset lever
direction marker
4.05 in.
(102.9 mm)
Drill (2) 9/64 in. holes
to mount to standard
RESET
single gang box
Key
G3 3-IN-1 SERIES
Turn-to-reset position
#8 x 1.5 in, sheet metal screw
used to mount back box to surface Key
(4) provided with back box option
Key
1/2 in. NPT plug
Back Box
(2) provided with back box option
When anchors are used drill
Red with 1/2 in. NPT thread Mounting Options
3/16 dia. holes 1-1/4 in. deep
top and bottom
Models with camera
When anchors are not used drill
KIT-GFC-BB
7/64 dia. 1-1/4 in. deep
Models without camera
KIT-GFA-BB
Back Box
HI LOW
Red with 1/2 in. NPT thread Volume Jumper
4.12 in.
top and bottom
(104.8 mm)
HIGH
Models with camera
(default)
KIT-GFC-BB
2.06 in.
Models without camera
(52.4 mm)
KIT-GFA-BB
MOUNTING HOLE KEY
KIT-GLR-BB-R
4.12 in.
HI LOW
(104.8 mm)
Four square box
3
HI LOW
HIGH Double gang box
2.06 in.
(default)
60.3mm European box
(52.4 mm)
4 LOW
Single gang box
5.43 in.
HI LOW
(137.8 mm)
LOW
2.9 in.
(73mm)
2.9 in.
(73mm)
Back Box Installation prep.
Camera user manual
Drill (4) 11/64 in. holes
4.125 in.
(104.77 mm)
for general wall mount
2.65 in. 0.74 in.
(67.3 mm) (18.7 mm)
0.61 in.
(15.5 mm)
1.08 in.
When anchors are used drill
4.125 in.
(27.4 mm)
3/16 dia. holes 1-1/4 in. deep
(104.77 mm)
1/2 in. NPT Thread
2.65 in. 0.74 in.
When anchors are not used drill
(67.3 mm) (18.7 mm)
7/64 dia. 1-1/4 in. deep
1.48 in.
1.08 in.
Back Box
(27.4 mm)
1.95 in.
3.281 in. 5.43 in.
Red with 1/2 in. NPT thread
(83.34 mm) (137.8 mm)
top and bottom
(49.5 mm)
Models with camera
KIT-GFC-BB
1.48 in.
1.75 in.
1.48 in.
Models without camera
(37.6 mm)
KIT-GFA-BB
(44.5 mm)
(37.6 mm)
3.281 in.
(83.34 mm)
4.05 in.
(102.9 mm)
#8 x 1.5 in, sheet metal screw
used to mount back box to surface FRAME MOUNTS TO:
• Single gang box
(4) provided with back box option
Drill (2) 9/64 in. holes
• Double gang box
to mount to standard
• Four square box
1/2 in. NPT plug
single gang box
• 60.3 mm European box
(2) provided with back box option
• KIT-GLR-BB-GY
#10 x 3/4 in. phillips pan head screw
used to attach frame to back box
(4) provided with back box option
Mounting hardware included with
flush mount version
Camera reset button
(2) #6-32 x 1.0 in.
Drill (2) 9/64 in. holes
Push button operating element Wire size:
14-30 AWG
(OPTIONAL CAMERA)
to mount to standard
Strip wires:
See camera operation manual
1/4 in. (6-7mm) single gang box
Detail A
Camera reset button
G3in1IS MAR2024
Wire size:
14-30 AWG
Strip wires:
Reset lever slide
1/4 in. (6-7mm)
direction marker
Mounting hardware included with
#10 x 3/4 in. phillips pan head screw
flush mount version
used to attach frame to back box
1/2 in. NPT plug
(2) #6-32 x 1.0 in.
(4) provided with back box option
(2) provided with back box option
Mounting hardware included with
Push button operating element
#10 x 3/4 in. phillips pan head screw
flush mount version
(OPTIONAL CAMERA)
Key
used to attach frame to back box
(2) #6-32 x 1.0 in.
See camera operation manual
(4) provided with back box option
Push button operating element Mounting hardware included with
(OPTIONAL CAMERA) flush mount version
See camera operation manual (2) #6-32 x 1.0 in.
HI LOW
Push button operating element
(OPTIONAL CAMERA)
See camera operation manual
Button lever LOW
CR123A Lithium battery
*Mylar Sound and LED PCB
Screw
Button
Flush mount options
MOUNTING HOLE KEY SCREW SIZE REQUIRED
Button lever
CR123A Lithium battery
MOUNTING HOLE KEY SCREW SIZE REQUIRED
KIT-GLR-BB-GY #10 x 3/4 in. pan-sms
*Mylar Sound and LED PCB
#10 x 3/4 in. pan-sms
Screw KIT-GLR-BB-R
Four square box #8-32 x 1.0 in. machine screw
Four square box #8-32 x 1.0 in. machine screw #6-32 x 1.0 in. machine screw
Double gang box
Button
60.3mm European box Double gang box #6-32 x 1.0 in. machine screw M3.5 x 35mm machine screw
60.3mm European box
M3.5 x 35mm machine screw
Single gang box #6-32 x 1.0 in. machine screw
Single gang box #6-32 x 1.0 in. machine screw
SCREW SIZE REQUIRED
#10 x 3/4 in. pan-sms
Volume Jumper
Drill (4) 11/64 in. holes
#8-32 x 1.0 in. machine screw
for general wall mount
#6-32 x 1.0 in. machine screw
M3.5 x 35mm machine screw
0.61 in.
RESET
#6-32 x 1.0 in. machine screw
(15.5 mm)
*Remove Mylar for sounder activation
1.75 in.
(44.5 mm)
1.95 in.
RESET
(49.5 mm)
1.75 in.
*Remove Mylar for sounder activation
(44.5 mm)
(37.6 mm)
4.05 in.
(102.9 mm)
Drill (2) 9/64 in. holes
to mount to standard
single gang box
European electrical box
1. Remove four (4) screws to access
4.125 in.
mounting positions.
(104.77 mm)
2. Mount the plate to an electrical box using
2.65 in. 0.74 in.
two (2) M3.5 screws.
(67.3 mm) (18.7 mm)
3. Place mechanism assembly on to the frame.
4. Insert four (4) screws.
RESET
1.08 in.
(27.4 mm)
1
3
2 4
RESET
G3C SERIES
1
3
5.43 in.
2 4
(137.8 mm)
3.281 in.
(83.34 mm)
A
When anchors are used drill
3/16 dia. holes 1-1/4 in. deep
1/2 in. NPT Thread
When anchors are not used drill
7/64 dia. 1-1/4 in. deep
A
Back Box
Included with G3C models
KIT-GLR-BB-GY back box - Gray
with 1/2 in. NPT thread
(top & bottom)
Camera accessory
Camera user manual
relay cable access Mounting hardware included with
flush mount version
(2) #6-32 x 1.0 in.
ADA
Compliant
Camera accessory
Camera user manual
relay cable access
#8 x 1.5 in, sheet metal screw
ADA
used to mount back box to surface
(4) provided with back box option
Reset lever Compliant
Lower rotating disc must be visible
Drill (4) 11/64 in.
for general wall
0.61
(15.5 m
1.95
(49.5 m
4.05 in.
(102.9 mm)
1.48 in.
D
to
Detail A
(1
Detail A
NC
NO