Safety Technology International GF FIRE Series Manual

Camera model surface mount version shown
FRAME MOUNTS TO:
• Single gang box
• Double gang box
• Four square box
• 60.3 mm European box
• KIT-GLR-BB-R
Key
l
ep
Pre Activation Alarm
drill
Volume Jumper
CR123A Lithium battery
n. NPT thread
m
amera
t camera
5.43 in.
HI LOW
(137.8 mm) Volume Jumper
MOUNTING HOLE KEY
KIT-GLR-BB-R
4.12 in.
HIGH
(default)
(104.8 mm)
Four square box
5.43 in.
Double gang box
(137.8 mm) 2.9 in.
in.
60.3mm European box
(73mm)
mm)
Single gang box
HI LOW
LOW
WARNING The Global Fire alarm initiating station has been tested and listed to UL38
and ULC S528, CSA 22.1 Part 1, and CAN/ULC S524. It is important to read, understand
and follow all instructions provided with this product. It is the installer's responsibility to
comply with NFPA72 and 101, NEC, mounting specifications according to ADA and other
applicable fire and electrical codes. Do not paint or alter the factory finish in any manner.
After installation and testing are complete, provide a copy of this manual to all personnel
responsible for testing and maintenance of this product. Regular testing of these products,
in accordance to NFPA standards, is required. Safety Technology International is not
responsible for improperly installed, tested or maintained devices.
USA
FRAME MOUNTS TO:
• Single gang box
• Double gang box
• Four square box
• 60.3 mm European box
FRAME MOUNTS TO:
• KIT-GLR-BB-R
• Single gang box
• Double gang box
Installation Components
• Four square box
• 60.3 mm European box
• KIT-GLR-BB-R
When anchors are used drill
3/16 dia. holes 1-1/4 in. deep
1/2 in. NPT Thread
When anchors are not used drill
7/64 dia. 1-1/4 in. deep
Back Box
Red with 1/2 in. NPT thread
top and bottom
Models with camera
KIT-GFC-BB
Models without camera
KIT-GFA-BB
Key
#8 x 1.5 in, sheet metal screw
used to mount back box to surface
(4) provided with back box option
Key
1/2 in. NPT plug
(2) provided with back box option
#10 x 3/4 in. phillips pan head screw
used to attach frame to back box
(4) provided with back box option
Mounting hardware included with
flush mount version
(2) #6-32 x 1.0 in.
Push button operating element
MOUNTING HOLE KEY
(OPTIONAL CAMERA)
See camera operation manual KIT-GLR-BB-R
4.12 in.
(104.8 mm)
Four square box
Double gang box
2.06 in.
MOUNTING HOLE KEY
60.3mm European box
(52.4 mm)
KIT-GLR-BB-R
4.12 in.
Single gang box
(104.8 mm)
Four square box
Button lever
Double gang box
2.06 in.
*Mylar Sound and LED PCB
60.3mm European box
(52.4 mm)
Screw
Single gang box
Button
SCREW SIZE REQUIRED
#10 x 3/4 in. pan-sms
Drill (4) 11/64 in. holes
#8-32 x 1.0 in. machine screw
for general wall mount
#6-32 x 1.0 in. machine screw
M3.5 x 35mm machine screw
0.61 in.
#6-32 x 1.0 in. machine screw
(15.5 mm)
2.9 in.
(73mm)
1.95 in.
RESET
*Remove Mylar for sounder activation
(49.5 mm)
ATTENTION La station d'initiation de l'alarme incendie Global Fire a été testée et répertoriée sur UL38
1.75 in.
1.48 in.
(44.5 mm) (37.6 mm) et ULC S528, CSA 22.1 Partie 1, et CAN/ULC S524. Il est important de lire, comprendre et suivre
toutes les instructions fournies avec ce produit. Il incombe à l'installateur de se conformer aux normes
NFPA72 et 101, NEC, aux spécifications de montage selon ADA et aux autres codes d'incendie et
4.05 in.
électriques applicables. Ne pas peindre ou modifier la finition d'usine de quelque manière que ce soit.
(102.9 mm)
Une fois l'installation terminée, fournir une copie de ce manuel à tout le personnel responsable des
essais et de la maintenance de ce produit. Des tests réguliers de ces produits, conformément aux
normes NFPA, sont nécessaires. Safety Technology International n'est pas responsable des dispositifs
installés, testés ou maintenus de manière incorrecte.
Drill (2) 9/64 in. holes
to mount to standard
All specifications and information shown were current as of publication and are subject to change without notice.
single gang box
When anchors are used drill
3/16 dia. holes 1-1/4 in. deep
1/2 in. NPT Thread
When anchors are not used drill
7/64 dia. 1-1/4 in. deep
When anchors are used drill
3/16 dia. holes 1-1/4 in. deep
1/2 in. NPT Thread
Back Box
When anchors are not used drill
Red with 1/2 in. NPT thread
7/64 dia. 1-1/4 in. deep
top and bottom
Models with camera
KIT-GFC-BB
Back Box
Recommended mounting height is measured from Models without camera
Red with 1/2 in. NPT thread
KIT-GFA-BB
top and bottom
the center of the push button to the floor level:
Models with camera
KIT-GFC-BB
• NFPA 72: 42 in. - 48 in.
Models without camera
• ULC S524: 1.35 m - 1.5 m KIT-GFA-BB
• BS5839 1.2 m - 1.6 m
CR123A Lithium battery
NOTE: verify and comply with local AHJ
#8 x 1.5 in, sheet metal screw
Screw
used to mount back box to surface
(4) provided with back box option
Button
1/2 in. NPT plug
#8 x 1.5 in, sheet metal screw
(2) provided with back box option
used to mount back box to surface
#10 x 3/4 in. phillips pan head screw
(4) provided with back box option
used to attach frame to back box
(4) provided with back box option
HI LOW 1/2 in. NPT plug Volume Jumper
Mounting hardware included with
(2) provided with back box option
flush mount version
HIGH
#10 x 3/4 in. phillips pan head screw
(2) #6-32 x 1.0 in. (default)
used to attach frame to back box
5.43 in.
Push button operating element
(4) provided with back box option
(137.8 mm)
(OPTIONAL CAMERA) Mounting hardware included with
5.43 in.
See camera operation manual flush mount version
(2) #6-32 x 1.0 in. (137.8 mm)
Push button operating element 5.43 in.
(OPTIONAL CAMERA) (137.8 mm)
HI LOW
2.9 in.
See camera operation manual
(73mm)
LOW
2.9 in.
(73mm)
2.9 in.
(73mm)
COM IN COM OUT
F
TO NEXT
A
INITIATING DEVICE
OR
Back Box Installation prep.
C
SCREW SIZE REQUIRED EOL RESISTOR
P
#10 x 3/4 in. pan-sms
N.O. IN N.O. OUT
Drill (4) 11/64 in. holes
#8-32 x 1.0 in. machine screw
for general wall mount
#6-32 x 1.0 in. machine screw
SCREW SIZE REQUIRED
M3.5 x 35mm machine screw
0.61 in.
#10 x 3/4 in. pan-sms
#6-32 x 1.0 in. machine screw (15.5 mm)
Drill (4) 11/64 in. holes
#8-32 x 1.0 in. machine screw
for general wall mount
#6-32 x 1.0 in. machine screw
M3.5 x 35mm machine screw
0.61 in.
#6-32 x 1.0 in. machine screw
(15.5 mm)
1.95 in.
RESET
(49.5 mm)
FRAME MOUNTS TO:
1.75 in.
1.48 in.
• Single gang box
(44.5 mm)
(37.6 mm)
• Double gang box
1.95 in.
RESET
• Four square box
(49.5 mm)
• 60.3 mm European box
1.75 in.
4.05 in. 1.48 in.
• KIT-GLR-BB-GY
(44.5 mm) (102.9 mm) (37.6 mm)
4.125 in.
(104.77 mm)
4.05 in.
2.65 in. 0.74 in. (102.9 mm)
(67.3 mm) (18.7 mm)
1.08 in.
Drill (2) 9/64 in. holes
(27.4 mm)
to mount to standard
single gang box
Drill (2) 9/64 in. holes
to mount to standard
single gang box
1
3.281 in. 5.43 in.
2
(83.34 mm) (137.8 mm)
GF FIRE SERIES
Detail A
Key
Detail A
Key
Key
Key
CR123A Lithium battery
*Mylar
Screw
Mounting Options
Button
CR123A Lithium battery
Button
MOUNTING HOLE KEY
HI LOW
Volume Jumper
KIT-GLR-BB-R
4.12 in.
MOUNTING HOLE KEY
HIGH
(104.8 mm)
Four square box
(default)
KIT-GLR-BB-R
4.12 in.
Double gang box
2.06 in. (104.8 mm)
Four square box
HI LOW Volume Jumper
60.3mm European box
Button lever
(52.4 mm)
Double gang box
2.06 in.
*Mylar Sound and LED PCB HIGH
MOUNTING HOLE KEY
60.3mm European box
(default)
(52.4 mm)
KIT-GLR-BB-R
4.12 in.
Single gang box
(104.8 mm)
Four square box
HI LOW
Double gang box
2.06 in.
LOW
60.3mm European box
(52.4 mm)
Single gang box
HI LOW
LOW
RESET
*Remove Mylar for sounder activation
4.125 in.
(104.77 mm)
2.65 in. 0.74 in.
(67.3 mm) (18.7 mm)
4.125 in.
(104.77 mm)
1.08 in.
2.65 in. 0.74 in.
(27.4 mm)
(67.3 mm) (18.7 mm)
When anchors are used drill
3/16 dia. holes 1-1/4 in. deep
1.08 in.
1/2 in. NPT Thread
(27.4 mm)
When anchors are not used drill
1
7/64 dia. 1-1/4 in. deep
3.281 in. 5.43 in.
2
(83.34 mm) (137.8 mm)
Back Box
Red with 1/2 in. NPT thread
top and bottom
3.281 in. 5.43 in.
Models with camera
(83.34 mm) (137.8 mm)
KIT-GFC-BB
Models without camera
KIT-GFA-BB
RESET
WARNING: This product can expose you to chemicals including
Dichloromethane, which is known to the State of California to cause
3
cancer, and Bisphenol A (BPA), which is known to the State of California
#8 x 1.5 in, sheet metal screw
used to mount back box to surface
to cause birth defects or other reproductive harm. For more information go
(4) provided with back box option 4
to www.P65Warnings.ca.gov.
1/2 in. NPT plug
Three year warranty or a one year limited warranty (from date of
(2) provided with back box option
purchase) on most products. See website for details. Electronic warranty
#10 x 3/4 in. phillips pan head screw
form at www.sti-usa.com/wc14.
used to attach frame to back box
Camera reset button
(4) provided with back box option
Mounting hardware included with
Wire size:
SIDE 1
flush mount version
14-30 AWG
(2) #6-32 x 1.0 in.
Strip wires:
Camera reset button
1/4 in. (6-7mm)
Push button operating element
(OPTIONAL CAMERA) Wire size:
14-30 AWG
See camera operation manual
Strip wires:
GFIS MAR2024
1/4 in. (6-7mm)
Push button operating element
(2) #6-32 x 1.0 in.
1/2 in. NPT plug
(OPTIONAL CAMERA)
(2) provided with back box option
Push button operating element
See camera operation manual
(OPTIONAL CAMERA)
#10 x 3/4 in. phillips pan head screw
used to attach frame to back box See camera operation manual
(4) provided with back box option
Mounting hardware included with
flush mount version
(2) #6-32 x 1.0 in.
Push button operating element
(OPTIONAL CAMERA)
See camera operation manual Button lever
Sound and LED PCB
COM IN COM OUT
F
TO NEXT
Button lever
A
INITIATING DEVICE
*Mylar Flush mount options Sound and LED PCB
OR
C
Screw
EOL RESISTOR
P
SCREW SIZE REQUIRED
N.O. IN N.O. OUT
#10 x 3/4 in. pan-sms
SCREW SIZE REQUIRED
Drill (4) 11/64 in.
#8-32 x 1.0 in. machine screw
#10 x 3/4 in. pan-sms
for general wall
#6-32 x 1.0 in. machine screw
Drill (4) 11/64 in. h
#8-32 x 1.0 in. machine screw
M3.5 x 35mm machine screw
for general wall m
#6-32 x 1.0 in. machine screw
Single gang box #6-32 x 1.0 in. machine screw
SCREW SIZE REQUIRED
M3.5 x 35mm machine screw
#10 x 3/4 in. pan-sms
#6-32 x 1.0 in. machine screw
Drill (4) 11/64 in. holes
#8-32 x 1.0 in. machine screw
for general wall mount
#6-32 x 1.0 in. machine screw
FRAME MOUNTS TO:
M3.5 x 35mm machine screw
• Single gang box 0.61 in.
*Remove Mylar for sounder activation
#6-32 x 1.0 in. machine screw
• Double gang box (15.5 mm)
RESET
• Four square box
• 60.3 mm European box
RESET 1.75 in.
• KIT-GLR-BB-GY
(44.5 mm)
*Remove Mylar for sounder activation
1.75 in.
1.95 in.
(44.5 mm)
(49.5 mm)
4.05 in.
1.75 in.
1.48 in.
(44.5 mm) (102.9 mm)
(37.6 mm)
4.05 in.
(102.9 mm)
4.05 in.
(102.9 mm)
Drill (2) 9/64 in. holes
to mount to standard
European electrical box
single gang box
1. Remove four (4) screws to access
mounting positions.
2. Mount the plate to an electrical box using
two (2) M3.5 screws.
3. Place mechanism assembly on to the frame.
4. Insert four (4) screws.
Key
RESET
3
RESET
4
1
3
Detail A
2 4
MOUNTING HOLE K
KIT-GLR-BB-GY
Four square box
Double gang box
60.3mm European b
Single gang box
Detail A
A
A
A
Camera accessory
Camera user manual
NC
relay cable access
Camera accessory
Camera user manual
relay cable access
ADA
Compliant
0.61
(15.5
0.61 in
(15.5 m
1/2 in. NP
1.95
(49.5 m
1.95 in
(49.5 mm
D
t
Dril
to m
#1
us
(4
M
flu
(2
Push but
(OPTION
See cam
NO C