Safety Technology International EM243608A1 Installation

Mount Enclosure in Desired Location
Prior to Mounting A/C Unit.
INSTALLATION NOTES
1. Read and understand instruction manual before mounting and
operating A/C Unit.
2. Install gasket provided on to A/C unit.
3. Insert power cord and wires through cutout in enclosure.
4. Mount A/C unit to enclosure by resting EZ mount tabs on
cutout edge. This will hold A/C unit in place while bolts are
inserted.
5. Insert the (4) 1/4-20 x 3/4 inch bolts with washers. Make sure
the threads of all (4) bolts have engaged with the A/C unit
before tightening.
6. Tighten the 4 bolts evenly.
7. Replace door with the hinge pins if door was removed.
Three year warranty or a one year limited warranty (from date of purchase) on most products.
See website for details. Electronic warranty form at www.sti-usa.com/wc14.
USA
INSTALLATION OF EM243608A1 METAL PROTECTIVE CABINET WITH AC
All specifications and information shown were current as of publication and are subject to change without notice.
A
DETAIL A
"EZ" MOUNT TABS
PULL
HINGE PIN
TO REMOVE DOOR
PULL BOTH HINGE PINS.
DETAIL B
A/C UNIT
INSTALL GASKET PROVIDED
ENCLOSURE
CUTOUT EDGE
1/4"-20 x 3/4"
BOLT & WASHER
(4) PROVIDED
B
EM243608A1 JULY2022
EMEA