Using Registration Memory; Registration Data; Registration Memory Operations - Casio PRIVIA PX-3S User Manual

Using Registration Memory

Normally, before playing something you need to set up
the Digital Piano by configuring a number of different
settings, including layer and split on/off, a tone
selection for each zone, equalizer settings, and DSP
settings. You can save up to 64 Digital Piano setups
(which include control panel and internal settings) to
registration memory for later recall when you need
them. Each setup is saved as "registration data."

Registration Data

The following are the settings that are stored as
registration data when you save a Digital Piano setup.
• Layer ON/OFF
• Split ON/OFF
• Split point
• Reverb ON/OFF
• Reverb type
• Chorus ON/OFF
• Chorus type
• Each zone tone number
• Each zone INT/EXT ON/OFF
• All common parameters (page E-18)
• All zone parameters (page E-28)
• Following function menu items (page E-38)
• Touch Response
• Pedal Assign
• Temperament type
• Temperament key note
• Stretch Tuning
• Acoustic Resonance ON/OFF
• Half Pedal Effect
NOTE
• The Digital Piano's current mode (MASTER
CONTROL, CARD PLAYER, ZONE EDIT) is not
included in registration data. This means that the
Digital Piano's mode does not change when you
recall registration data.
• The following function menu settings are not
included in registration data. You can, however,
perform the backup operation (page E-40) to retain
these settings when the Digital Piano is turned off.
• Tuning
• EQ Hold
• Display Contrast
• Song MIDI Out
• Song Volume
• Song Pre-count
• Song Repeat
• The backup operation (page E-40) saves all of the
above function menu settings, as well as all of the
settings that are included in registration data.
E-34
MASTER CONTROL
Registration Memory
Operations
During registration data save and recall operations, the
location of the data in registration memory is specified
using a bank number and an area number. Registration
memory has eight banks, each of which is divided into
eight areas.
To save a setup as registration data
1.
Configure the Digital Piano with the settings
you want to save.
2.
Press the br (REGISTRATION) button so the
lamp below it is lit. This is the
REGISTRATION mode.
Lit
3.
(w, q) buttons to scroll through
bt
Use the
the banks (1 to 8) until the bank where you
want to save the registration data is
displayed.
CARD PLAYER
Bank number