Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Swytch Brompton Specific
Summary of Contents for Swytch Brompton Specific
- Page 1 Brompton Specific...
- Page 2 Version 001 Swytch Help Centre...
-
Page 3: Table Of Contents
Table of Contents Torque Washer Magnetic Disc(s) Pedal Sensor Bro Peg Cable Routing... -
Page 4: Torque Sensor
Torque Sensor To fit the Brompton torque washer, first thread the motor cable through the keyhole in the washer. Angle the washer with the lip facing towards the forks. Remove any of the existing wheel hardware. Tighten and secure the nut, being Slot the torque washer into the careful not to pinch the motor Brompton forks. -
Page 5: Magnetic Disc(S)
Magnetic Disc(s) 1. Choose the correct pedal type Determine which magnetic disc you need by finding your pedal arm shape in the table below. What shape is the inside of your pedal arm? Use this configuration Brompton PRE 2013 Brompton PAS type A Back of the pedal arm has a concave indentation. -
Page 6: Assemble The Parts
Assemble the parts Screw the two-part clamp over the Tighten the screws with a 2.5mm pedal arm. Note, you don’t need to Allen key. remove the pedal arm to do this. Screws Retention ring Magnetic disc Finished... -
Page 7: Pedal Sensor
Pedal Sensor Stick the sensor onto the bottom Tighten the sensor screw to bracket housing of the Brompton. secure it in position and add Angle the sensor so it’s sitting cable ties to secure it to the within 3mm of the magnetic disc, frame. -
Page 8: Bro Peg
Bro Peg Remove the existing peg To remove the existing peg from the Brompton frame, rotate it in an anti-clockwise direction. Install the new Bro Peg With an adjustable spanner screw The peg should bend downwards the Bro Peg clock-wise until there is and line up with the latch on the 10mm of studding left. - Page 9 3. Finished...
- Page 10 If on your Brompton bike you have front luggage mounted to your luggage mounting point follow the information below. When your Brompton is upright, your Bro Peg needs to be folded inwards like this. When folding the handlebar of your Brompton, make sure to unfold the Bro Peg.
-
Page 11: Cable Routing
Cable Routing Follow the existing cable routing on Using the cable ties provided, your bike. Allow some slack so you secure everything to your bike. can still turn the handlebars and fold your bike with ease. Make sure the cables aren’t in the way when pedaling. - Page 12 Swytch Technology Ltd, Unit 2A 455 Wick Lane London E3 2TB...
- Page 13 Scan here for the Swytch Help Centre.
Need help?
Do you have a question about the Brompton Specific and is the answer not in the manual?
Questions and answers