Related Manuals for Wacker Neuson LTN5
Summary of Contents for Wacker Neuson LTN5
- Page 1 Operator’s Manual Light Tower LTN5 Machine Type LTN5Y Material Number 5100072792 Version Date 09/2024 Language [en]...
- Page 2 Violations of legal regulations, in particular of the copyright protection, will be subject to civil and criminal prosecution. Wacker Neuson Produktion GmbH & Co. KG reserves the right to change its products and their technical specifications for further technical development at any time without any claim to changes to machines already delivered.
-
Page 3: Table Of Contents
6.3 Lifting the machine ........................... 36 6.4 Lashing the machine ........................37 6.5 Transport with towing vehicle......................38 6.6 Selection of the installation site......................40 7 Commissioning [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 4 12 Technical Data 12.1 General instructions ......................... 82 12.2 Noise information ..........................82 12.3 LTN5 ..............................82 12.4 Combustion engine .......................... 87 12.5 Conversion table ..........................87 Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
-
Page 5: Declaration Of Conformity
Declaration of conformity Declaration of conformity [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 7: Foreword
1., 2., 3… Indicates an activity. The sequence of the steps must be observed. ⇨ Indicates a result or an intermediate result of an action. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 8: Accident Prevention Regulations
Contact person Depending on the country, the contact person is a service partner, a sub- sidiary or a dealer. • On the Internet at http://www.wackerneuson.com. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 9: Limitation Of Liability 2.5
Group - Type Material number (Mat. no.) LTN5Y SA 5100069548 LTN5Yp 5100069549 LTN5Y 5100069550 LTN5Ypa 5100069551 LTN5Y CH 5100069552 LTN5Y UK 5100069553 LTN5Ypk 5100077880 LTN5Yp HD 5100079429 [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 10: Usage
• Operating the machine outside of factory specifications. • Operating the machine in a manner inconsistent with the warnings on the machine and in the operator's manual. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 11: Safety
Failure to follow these instructions may result in electric shock, fire and/or serious injury, as well as damage to the machine and/or other objects. • Keep safety instructions and information for the future. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 12: Structual Changes
The operator’s manual must be supplemented by further instructions for compliance with operational, official, national or generally applic- able safety guidelines. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 13: Obligations Of The Operator 4.5
It may contain instructions which are not relev- ant for this machine. 4.7.1 Workplace Warning! Hazard of poisoning from exhaust gases. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 14: Personal Safety
People can be injured as a result. • Do not work under the influence of drugs, alcohol or medication. Warning! Danger of being drawn in by unsuitable clothing and long hair. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 15: Handling And Use
• Only use suitable and tested lifting gear and slings with sufficient load-bearing capacity. • Secure the machine safely to the lifting gear. • Use appropriate transport method. Warning! Risk of crushing from swinging loads. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 16: Specific Safety Instructions For Light Mast
People can suffer a lightning strike and be seriously injured or killed. • When the mast is extended, do not operate the machine when a thunderstorm is approaching or during thunderstorms. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 17: Operational Safety
• Do not exceed the permissible maximum speed of trailer. • The recommended maximum speed for off-road towing is 15 km/h (lower in rough terrain). Warning! Danger of falling on slopes and drop-off edges. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 18: Safety Features
• Ensure adequate ventilation/exhaustion. Safety features Warning! Risk of injury due to modified or removed safety devices. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 19: Service 4.10
4.10 Service Warning! Risk of injury from defective machine. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 20 People can be injured by moving parts. • Disconnect starter battery before maintenance. 4.10.1 Threaded fittings Caution! Risk of injury due to missing or loose screw connections. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
-
Page 21: Vehicle Fluids 4.11
• In case of skin contact, wash skin immediately with soap and water. • Do not eat or drink while working with vehicle fluids. Caution! Risk of injury from the pressurized hydraulic system. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 22: Combustion Engine
The engine surface and exhaust system can become very hot after only a short time. Persons can suffer burns on contact. • Switch off the engine and let it cool down. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 23: Starter Battery 4.13
• Fire, sparks and smoking are prohibited when handling starter batter- ies. Note! Battery damage due to improper handling. • Do not open the starter battery. • For charging, observe the battery manufacturer's instructions. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 24: Description
Enter the data on the machine in the following table: Designation Your details Group - Type Material number (Mat.-No Machine Version (Rev.) Machine number (serial no.) Year of construction (date) Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 25: Safety And Information Labels
CERCANO PARA PEDIR UN EJEMPLAR ADICIONAL. LA NOTICE D'EMPLOI DOIT ETRE MUNIE SUR LA MACHINE. CONTACTER LE DISTRIBUTEUR WACKER LE PLUS PROCHE POUR COMMANDER UN EXEMPLAIRE SUPPLEMENTAIRE. 115096 [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 26 CERCANO PARA PEDIR UN EJEMPLAR ADICIONAL. LA NOTICE D'EMPLOI DOIT ETRE MUNIE SUR LA MACHINE. CONTACTER LE DISTRIBUTEUR WACKER LE PLUS PROCHE POUR COMMANDER UN EXEMPLAIRE SUPPLEMENTAIRE. 115096 General machine Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 27 • Fire, open flame and smoking are prohibited. Machine start quick guide. Risk of injury! Read the operator’s manual. Danger of electric shock. Read the operator’s manual. Risk of crushing! Maintain distance! [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
- Page 28 CONTACTER LE DISTRIBUTEUR WACKER LE PLUS PROCHE POUR COMMANDER UN EXEMPLAIRE SUPPLEMENTAIRE. 115096 Only lift the machine at the central suspension with tested lifting gear and slinging gear (safety load hook). Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 29 Description of the Machine Type plates and labels 5.2 Tie-down points. Guaranteed sound power level. Drain engine oil. Type label. Tightening torque. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
-
Page 30: Components
Front support legs extendable Forklift pockets crosswise Rear support legs Forklift pockets sideways Engine hood Central suspension with cover Base frame Under carriage Chock Support wheel Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... - Page 31 3 Rear support legs 4 Front support legs extendable 5 Front panel 6 Forklift pockets crosswise 7 Forklift pockets sideways 8 Engine hood 9 Central suspension with cover [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
- Page 32 Description of the Machine 5.3 Components General machine Air filter Hydraulic unit Coolant drain Fuel filter/water separator Starter battery Fuses Oil dipstick Oil filter Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
-
Page 33: Control Elements 5.4
Machine with trailer Mast rotation handle Control panel cover lockable Engine hood interlock Fuel panel Parking brake lever Control panel Breakaway safety rope Mast rotation lock [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 34: Control Panel
Display Engine status indicator lights Activation switch Light sensor Emergency stop button Current input Socket Switch for isolation test Insulation status indicator light Light switch Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 35: Transportation
Loosen and remove the mounting screw. Turn the tow bar to the vertical position. Re-attach the fastening screw from behind in the lower hole and tighten it. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 36: Lifting The Machine
Do not exceed the permissible total height during transport (height of the loading area plus the height of the light pole). Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 37: Lashing The Machine 6.4
Lash the machine at the lashing points as shown. ð Suitable lashing equipment e.g. lashing strap (1000 daN), chain (6/8 2200 daN). ð The machine is secured against unrolling, slipping and tipping over. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 38: Transport With Towing Vehicle
Insert the locking pin at the locking handle again. ð The height of the drawbar is thus set. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... - Page 39 Place chocks 1 in front and rear of the wheels to ensure that the machine cannot move when it is decoupled from the vehicle. Unlock coupling 5 and take it off the trailer coupling of the towing vehicle. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
-
Page 40: Selection Of The Installation Site
• Do not set up the machine in the immediate vicinity of elevated cables or power lines. • Set up the machine at ground level or at a slightly elevated location. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 41: Commissioning
WARNING Improper handling may result in injury or serious material damage. ► Please read and follow all safety instructions in this operator's manual. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 42: Tests Before Commissioning
• The illuminated area must be lower or on the same level as the light- ing elements. • Leave adequate space around the machine to extend the supports. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... - Page 43 Release clamp 6 of rear support legs 5. Lower rear support legs 5 to the ground. Tighten clamp 6 of the rear support legs 5. ð The machine is stabilized and aligned. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
- Page 44 In this way, the lighting elements can be aligned both vertically and horizontally. To be able to reach the lighting elements for adjustment, the mast must be lowered completely. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 45 If the lighting elements are aligned evenly, each with a 90 degree offset, the largest possible area is obtained. The optimum angle with the ground is 70 degrees. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
- Page 46 Commissioning 7.3 Putting into operation Maximum achievable area illumination see Technical Data on page Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 47 Check engine oil level, fill engine oil if necessary. Check the coolant level; refill coolant as necessary. Move all light switches 1 to position B. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
- Page 48 Switch on the light by pressing key 3 on the display. 7.3.7 Starting with external power supply Connect external power supply. Move light switch 1 to position B. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 49 If the machine is in automatic mode and, for example, it is in the time range in which it should illuminate, the machine starts automatically. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
-
Page 50: Operation
The system automatically lowers the mast when the trailer parking brake is released and also prevents the mast from raising if the parking brake is not applied. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 51: Display Symbols
Symbol for the mode Mast is lowered Alternator condition (working/not working) Mast is raised Status of lighting (On/Off) Machine status information External power supply connected [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 52 Operation 8.3 Display Alternator does not work. Alternator is working. Light off. Light on. Manual mode Automatic mode with light sensor Automatic mode with timer Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
-
Page 53: Start Display
Current time Voltage of the starter battery Number of operating hours Symbol for the mode Alternator condition (working/not working) Status of lighting (On/Off) Machine status information [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 54 Pressing the key starts the starting sequence (pre-heating, start, wait for generated voltage). When the engine is running, pressing the key again will stop it. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
-
Page 55: Status Display
“Automatic light” operating mode. 8.3.5 Operator settings ▪ Press the Settings key on the status display once (1x). ð The current setting is displayed. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 56: Operating Modes
After a successful engine start, the lamps are switched on. If the light sensor detects "day," the lamps, elec- trical system and engine are switched off. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... - Page 57 Another example of setting the Timer. The light comes on at 7:32 p.m. on Saturday and stays on for 7 hours. The light then goes out on Sunday at 02:32 in the morning. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
- Page 58 Disconnect the load cable from the socket. Switch off the engine. Switch on the engine again. ð The socket is powered again. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
-
Page 59: Wind Sensor
Switch off the lighting elements with light switch 3. Lower the mast completely using key 2. Set the lighting elements to transport position. Switch off the engine with engine switch 1. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 60 Lower the mast completely using key 2. Set the lighting elements to transport position. Move activation switch 1 to position A. Disconnect external power supply. ð Machine is switched off. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
-
Page 61: Maintenance
Burn hazard due to hot engine oil! Splashes of hot oil can cause burns to the skin. ► Switch off the engine and let it cool down. ► Use protective gloves. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 62 (e.g. due to an emergency). CAUTION Health risk from fuel, lubricants and coolants! ► Do not inhale vapors. ► Avoid skin and eye contact. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
-
Page 63: Maintenance Plan 9.2
Monthly pulling Clean the machine. ● • Visual check for completeness. • Visual check for damage. • Visual check for leakages. Check threaded fittings. ● [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 64 Check the fan drive. ● Check fuel filter/water separator. ● Change engine oil.* Change the engine oil filter.* Check injection nozzles.* Check valve clearance.* Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 65 If labels are no longer legible, dam- aged or missing, they must be re- placed. Depending on whichever interval occurs first. * Have this work carried out by a service partner. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
-
Page 66: Maintenance Work
Conduct visual inspections to check for loose or frayed cable insula- tion or cable sheathing. Get the damaged cables replaced immediately by the service part- ner. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... - Page 67 Tighten the bracket clamp 3 until the battery cannot move. 9.3.4 Check indicator lights, displays, and switches ▪ Check indicator lights, displays, and switches before startup and during operation to ensure proper operation. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
- Page 68 Inspect wiring for wear, tear, and vibration abrasion. 9.3.10 Check support legs Check machine support legs. Replace all missing or damaged parts before raising the mast. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 69 104° C (220° F) • The engine oil pressure switch. – The engine oil switch prevents the engine from running at low oil pressure. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
-
Page 70: Replacing The Air Filter Cartridge
Clean the filter housings 2 and 5 from outside. Loosen the fasteners 4 on the air filter cover 5 and remove the cover. Remove the filter element 3. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... - Page 71 Tighten the mounting screws with the right torque (refer to torque table). Regularly check V-belt 4 for the right tension and wear. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
-
Page 72: Check The Fuel Level
Screw on the seal 2 and the cover 4 using mounting screws 3. Dispose of drained fuel, condensates and deposits in an environ- mentally friendly manner. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 73: Check Hoses
The level must be within the range marked on the oil dipstick. If the level is below the marked range, top up the engine oil. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... -
Page 74: Check The Hydraulic Oil Level
Refill hydraulic oil until the hydraulic oil tank is filled ¾, see Tech- nical Data on page Screw the closing lid back on the hydraulic oil tank and tighten it by hand. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... -
Page 75: Troubleshooting
Check the oil level and the oil filter. Relay tripped. Check the relay and change it if ne- cessary.* Defective activation switch Check the activation switch and change it if necessary.* [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 76 Check the fuel filter and change it if necessary.* Clogged air filter. Check the filter element and change it if necessary.* Excessive vibrations. Engine speed too low. See "Engine speed too low". Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 77 The sheathed cable is defective. Change the sheathed cable.* Defective pulley. Change pulley.* * Have this work carried out by a service partner. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
-
Page 78: Jump Starting The Machine
Connect the alligator clip 3 of the black cable to the negative ter- minal (-) of the boosting battery. Connect the other alligator clip 4 of the black cable to the negative terminal (-) of the starter battery. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... - Page 79 Detach the other alligator clip 1 of the red cable at the positive ter- minal (+) of the boosting battery. Attach the cover of the starter battery A and the terminal caps of the boosting battery B. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
-
Page 80: Shutdown
Professional disposal of this machine avoids negative effects on human health and the environment, helps with the targeted treatment of pollut- ants and makes it possible to recycle valuable raw materials. Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... - Page 81 National laws or regional regulations may also require batteries to be disposed of separately. Disposal of the battery in accordance with national regulations must therefore be ensured. [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
-
Page 82: Technical Data
Aggregate continuous power 1~ (COP)] [kW] Length [mm] 2930 2620 Width [mm] 1600 1220 Height [mm] 2545 2700 Maximum light spot height [m] 8,20 8,20 Maximum mast height [m] Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]... - Page 83 Output current [A] 15,2 15,2 Output voltage [V] Output frequency [Hz] Phases Rated power output [S] [kVA] Aggregate continuous power 1~ (COP)] [kW] Length [mm] 2620 2680 [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
- Page 84 LTN5Y CH LTN5Y UK Material number machine 5100069552 5100069553 Material number engine 5100007082 5100007082 Output current [A] 15,2 15,2 Output voltage [V] Output frequency [Hz] Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 85 Sound pressure level LpA [dB(A)] Sound power level LWA, measured [dB(A)] Sound power level LWA, guaranteed [dB(A)] Hydraulic oil specifications HVLP 46 HVLP 46 Operating pressure [bar] [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual...
- Page 86 Runtime (only light) [h] Protection class Protection class IP44 IP44 Sound pressure level LpA [dB(A)] Sound power level LWA, measured [dB(A)] Sound power level LWA, guaranteed [dB(A)] Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
-
Page 87: Combustion Engine 12.4
35.31 ft³ 1 ml 0.034 US fl.oz. 1 l 0.26 gal. 1 l/min 0.26 gal./min Length units 1 mm 0.039 in 1 m 3.28 ft Weights 1 kg 2.2 lbs. 1 g 0.035 oz. Pressure [en] | Version: 3 | 09/2024 | 5100072792 | LTN5Y | LTN5 | Operator’s Manual... - Page 88 1 kg/cm² 14.22 lbs/in² Force/output 1 kN 224.81 lbf 1 kW 1.34 hp 1 PS 0.986 hp Torque 1 Nm 0.74 ft.lbs Speed 1 km/h 0.62 mph Acceleration 1 m/s² 3.28 ft./s² Operator’s Manual | LTN5Y | LTN5 | 5100072792 | 09/2024 | Version: 3 | [en]...
- Page 90 Wacker Neuson Produktion GmbH & Co. KG Wackerstraße 6 D-85084 Reichertshofen Tel.: +49 8453 340-0 Email: service-LE@wackerneuson.com www.wackerneuson.com Material Number: 5100072792 Language: [en]...
Need help?
Do you have a question about the LTN5 and is the answer not in the manual?
Questions and answers