Table of Contents
Advertisement
Component
Power connector
Voltage switch
PS/2 keyboard port
Integrated monitor
(VGA) port
HDMI port
USB ports
Surround left/right
jack (black)
S/PDIF output jack
Microphone jack
(pink)
Headphone/analog
speakers jack (green)
-OR-
Front speakers jack
Modem jack
(optional)
Case cover Phillips
screws
10
CHAPTER 2: Checking Out Your Computer
Icon
Description
Plug the power cord into this connector.
Make sure this switch is set to the proper
local voltage.
Plug a PS/2 keyboard into this port.
Connect a VGA monitor to this port if the
optional add-in video card is not installed.
Connect an HDMI video device to this port.
Plug USB (Universal Serial Bus) devices (such
as a USB printer, scanner, camera, keyboard,
or mouse) into these ports. For more
information, see
scanner, or other device" on page
Plug your rear right and left speakers into
this jack. This jack is disabled when an audio
expansion card is installed.
For more information, see
audio jacks" on page
Plug an optical cable from an amplifier or
entertainment system into this jack for
digital sound.
Plug a microphone into this jack. This jack is
disabled when an audio expansion card is
installed.
This jack is user configurable for one of the
following:
Headphone: Plug headphones or
amplified speakers into this jack
(Default).
Stereo out: Plug your front left and right
speakers into this jack.
This jack is disabled when an audio
expansion card is installed. For more
information, see
jacks" on page
Plug a modem cable into this jack. For more
information, see
modem" on page
Remove these screws to remove the left side
panel.
"Installing a printer,
"Configuring the
33.
"Configuring the audio
33.
"Connecting a dial-up
17.
34.
Advertisement
Table of Contents
