Highland TRINITY HT3CI Appliance Operation Manual page 4

3. The outer burner cap should then be placed onto the distributor
ring with the locating pin 'B' securely locating in the location recess
'B' of the distributor ring. When correctly assembled the cross over
on the outer burner cap should lie adjacent to the spark electrode
protruding from the burner body.
4. Finally, gently place the inner burner cap into position in the centre
of the WOK burner.
NOTE: AFTER REMOvAL, OR CLEANING, OF PARTS ALWAYS
FOLLOW THIS PROCEDURE TO ENSURE THE BURNER
IS CORRECTLY ASSEMBLED.
NOTE: ALWAYS ENSURE ALL PARTS ARE CLEAN AND DRY
PRIOR TO OPERATING THE BURNER.