RiDom Ri-MGBD-1C Installation Manual

Motion curtain and glassbreak detector
«Ri-MGBD-1С»
Installation guide
1 GENERAL INFORMATION
1.1 Motion curtain and glassbreak detector «Ri-MGBD-1С» (hereinafter
referred to as the Detector) detects movement in the protected area of a
closed room and transmit notifications via a two-way radio channel in ac-
cordance with the «Ri-Contact-R» protocol.
1.2 The Detector works as part of the smart home security system
RiDom, communicating with the control center «Ri-HUB-1» (hereinafter re-
ferred to as the Hub), via the radio channel protocol «Ri-Contact-R».
1.3 The Detector does not require licensing and registration as the radio
frequency device.
1.4 The Detector combines two independent detection channels:
- passive sound acoustic channel (hereinafter – AC channel);
- passive optical-electronic, infrared channel (hereinafter – IR channel).
The AC channel detects the destruction of structures made of glass, as
well as glass blocks.
The IR channel detects attempts to enter the secured space of a closed
room.
1.5 The Detector is resistant to external illumination and radio interference,
as well as interference caused by small animals like mice, rats, birds in cages
at a distance of at least 2.5 m.
1.6 The Detector can be installed directly on the wall or in the corner of
the room.
1.7 The Detector generates and transmits seven types of notifications over
the radio channel:
- normal status;
- alarm;
- opening of the case or removal from the mounting surface;
- the battery discharge;
- «Linking» mode;
- «Identification» mode;
- communication quality assessment.
1.8 Detector is designed for continuous round-the-clock operation.
1.9 The Detector ensures pet immunity to cats and dogs up to 40 kg.
1.10 The Detector is resistant to electromagnetic interference.
2 FEATURES
- Sensitive elements: dual area pyroelectric receiver for IR channel and
microphone for AC channel.
- Spherical lens ensures high detectability.
- Digital signal processing.
- Adjustable sensitivity of AC and IR channels.
- Up to 40 kg pet immunity.
- Protection against penetration of insects to the pyro receiver chamber.
3 SPECIFICATIONS
Table 1
Parameter
Frequency range
Radiation power, no more
Maximum detection range:
- AC channel for glass area (R):
- IR channel
Sensitivity:
- AK channel (HF):
- level 3 (max)*
- level 2
- level 1
- level 0 (min)
- IR channel
Minimum area of protected glass
Warm-up time
Protection class
Battery type
Dimensions
Weight
Battery life at 60 seconds period
Average service life
Operational conditions
Operating temperature range
Permissible air humidity at a temperature
of +25 °C, without moisture condensation
* Set by default
Value
868,7...869,2 MHz
25 mW
more than 1 m 10 m
2
less than 1 m 6 m
2
12 m
Selectable:
3
2
1
0
12 m
0,1 m
Less than 60 seconds
IP30
CR123A, 1 pc.
109х57х44 mm
0,1 kg
30 months
8 years
-20... +55
Up to 98 %
4 DETECTION ZONE SCHEME
5 m
1 m
0
1 m
Top view
5 SCOPE OF SUPPLY
Table 2
Motion curtain and glassbreak detector «Ri-MGBD-1С»
Lithium battery CR123A
Bracket
Installation guide for the(curtain) «Ri-MGBD-1С»
* Installed
** Supplied by request
6 VIEW AND DESIGN
The Detector consists of a case base (1), a hatch (2), a case cover (3) with
an installed printed circuit board (4).
The following elements are located the printed circuit board:
- tamper switch (5);
- battery holder (6);
- pyro receiver (7);
- microphone (8);
- RESET contacts (9);
- opening sensor (10).
When attaching the base to the bracket, use the screw (11).
Bracket
2
PCB back view
С
о
12 m
12 m
Picture 1 – Diagram of IR detection area
180
о
6 m
Microphone
orientation
R
Reliable detection
zone
Picture 2 – Diagram of AC detection area
Name
1
11
RESET
10
9
Picture 3 – Detector view
Spatial structure of the
sensitive zone
Side view
6 m
R
90
о
Qty.
1 pc.
1 pc.*
1 pc.**
1 copy.
2
4
5
6
3
8
7