Garmin GNS 530W Pilot's Manual & Reference page 182

9 - AUX PAGES
Utility Page
To record or reset the departure time:
1. Select "Flight Timers" from the Utility Page.
Turn the large right knob to highlight the
2.
reset mode field, under "Departure Time".
The reset mode field indicates "Pwr-on" or
"GS>30kt".
Turn the small right knob to select the desired
3.
reset mode. ("Pwr-on" records a departure
time when the 500W-series unit is turned on.
"GS>30kt" records a departure time once
the GPS-computed ground speed exceeds 30
knots.)
The 500W-series unit can be configured to
record the departure time when the unit
is powered on or when your ground speed
exceeds 30 knots.
Press ENT when finished.
4.
5. To reset the departure time, turn the large
right knob to highlight "Reset?" and press
ENT. This will reset the departure time to the
current time.
172
To view, use or reset total trip time:
1. Select "Flight Timers" from the Utility Page.
Turn the large right knob to highlight the
2.
reset mode field, under "Total Trip Time".
(The reset mode field indicates "Pwr-on" or
"GS>30kt".)
Turn the small right knob to select the desired
3.
reset mode. ("Pwr-on" resets trip time to zero
hours/minutes/seconds each time the 500W-
series unit is turned on. "GS>30kt" resets trip
time to zero after power on and when the GPS-
computed ground speed exceeds 30 knots.)
Turn the small right knob to select when the
trip timer resets: each time the 500W-series
unit is powered on or when ground speed
exceeds 30 knots.
Press ENT when finished.
4.
5. To reset the total trip time, turn the large right
knob to highlight "Reset?" and press ENT.