GE 25865GE3 User Manual page 31

NOTE: A handset or base can enter conference mode directly by
pressing the TALK/LINE1/flash1, TALK/LINE2/flash2 on the second handset
or base during a call.
Between a handset or base and external calls on the Line 1 and Line 2
1. During an external call on either Line 1 or Line , press the HOLD soft key to put the call
on hold.
. If the originating line is Line 1, press the TALK/LINE/flash button. Line 1 icon flashes
and Line  icon shows in the display steadily.
3. Press the CONF soft key to conference with the external call.
Transferring External Call to Other Handset or Base
During an external call, you may transfer the external call to another handset or base.
1. Press the intercom button on the originating handset or base to put an external call on
hold, and then page the receiving handset or base.
. The list of handsets or base shows in the display. Use the
desired handset or base.
3. Press the PAGE soft key to start the page. You will hear a paging tone. PAGING shows
on the originating handset's display or base display, and PAGING FROM.... shows on the
receiving handset's display or base display.
4. When the receiving handset connects, press the END/CANCEL or handsfree button on
the originating handset or base to transfer the call.
- OR -
Press the END/CANCEL or handsfree button on the originating handset or base to
transfer the call.
NOTE: If there is no answer within 30 seconds after transferring the
call, then both units receive a call back notification and CALL BACK
shows on the display. If neither unit answers within 20 seconds, then
the external call will be automatically dropped.
5 or 6
button to select
31