Intercom Operation; Making An Intercom Call; Receiving An Intercom Call - GE 25865GE3 User Manual

Intercom Operation

A two-way intercom is possible between the base and cordless handset(s) without
tying up the telephone line and since the telephone line is not used, you can still receive
incoming calls.

Making an Intercom Call

1. Make sure the phone is OFF (not in TALK mode).
. Press the intercom button.
3. Use the 5 or 6 buttons to select the desired handset or base.
NOTE: If you only have one handset registered in the system, it is
paged automatically.
4. Press the PAGE soft key.
5. The receiving handset or base is paged, and the receiving handsets or base emit a
paging tone and the following information shows in the display:
HANDSET 2
Sending Handset/Base
When the OK soft key or intercom button on the receiving handset or base is pressed,
the page is answered. If the page is not answered after two minutes, NO ANSWER shows
in the display of sending handset or base and the page is cancelled. The unit returns to
standby mode.
NOTE: If a personalized name is assigned to the handset during
registration, then that name is displayed instead of handset number.
NOTE: To cancel the page, press the EXIT soft key or intercom key on
the sending party.

Receiving an Intercom Call

When you receive an intercom call, the handset or base beeps. To answer the intercom
call, press the OK soft key, the TALK/LINE1/flash1, TALK/LINE/flash button or the
intercom button.
PAGING
EXIT
PAGING FROM
HANDSET 1
OK
Receiving Handset/Base
EXIT
9