Clearing Paper Jams - Fujitsu ScanSnap S1300 Operator's Manual

Clearing Paper Jams

If a paper jam occurs during scanning, follow the procedure below to remove the jammed
document.
CAUTION
Open the ADF top section and remove the jammed document smoothly.
Be careful not to touch any sharp parts when removing the jammed document.
Doing so may result in injuries.
Be careful not to get your accessories (ties, necklaces etc.) or hair caught inside the
ScanSnap when removing jammed documents.
Be careful of burns as the surface of the scan glass gets hot when the ScanSnap is used.
1.
Remove the document from the ADF paper chute (cover).
2.
Pull the ADF release tab to open the ADF top section.
ADF top section
Clean the inside of the ScanSnap by following the guidelines in
ScanSnap" (page 283).
267
Clearing Paper Jams
"Cleaning the Inside of the
ADF paper
chute (cover)
ADF release tab