Miele@Home; Remoteupdate - Miele H 7240 BM Operating And Installation Instructions

Settings
The system lock will remain activated
even after a power failure.
-
On
The system lock is now active. Before
you can use the oven, touch the OK
sensor control for at least 6 seconds.
-
Off
The system lock is now deactivated.
You can use the oven as normal.

Miele@home

The oven is a Miele@home-
compatible domestic appliance. Your
oven is equipped ex-works with a WiFi
communication module and is suitable
for wireless communication.
There are a number of ways of
connecting your oven to your WiFi
network. We recommend connecting
your oven to your WiFi network with the
help of the Miele app or via WPS.
-
Activate
This setting is only visible if
Miele@home is deactivated. The WiFi
function is reactivated.
-
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up; the
WiFi function is turned off.
-
Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the WiFi
reception quality, network name, and
IP address.
-
Set up again
This setting is only visible if a WiFi
network has already been set up.
Reset the network settings and set up
a new network connection straight
away.
38
-
Reset
This setting is only visible if a WiFi
network has already been set up. The
WiFi function is deactivated and the
connection to the WiFi network will
be reset to the factory default. You
must set up a new connection to the
WiFi network to be able to use
Miele@home.
Reset the network settings if you are
disposing of or selling your oven, or if
you are putting a used oven into
operation. This is the only way to
ensure that all personal data has been
removed and the previous owner will
no longer be able to access the oven.
-
Set up
This setting is only visible if no
connection to the WiFi network has
been set up yet. You must set up a
new connection to the WiFi network
to be able to use Miele@home.

RemoteUpdate

The
RemoteUpdate
displayed and can only be selected if
the requirements for using
Miele@home have been met (see
"Before using for the first time –
Miele@home").
The RemoteUpdate function is used for
updating the software in your oven. If an
update is available for your oven, it will
automatically download it. Updates will
not be installed automatically. They
must be initiated manually.
If you do not install an update, you can
continue to use your oven as usual.
However, Miele recommends installing
updates.
menu option is only