SISCO Cup Anemometer Operating Instructions

Cup Anemometer
Operating Instructions
Dear Customer
Thank you for purchasing this product.
For best possible performance and safety,please follow
these operating instructions carefully.
Use as Directed
This device serves exclusively to wind force meas-
urement.
1
General precautions
Check this device for possible damages before every use.
If it shows visible damages,it may not be used anymore.
Consult your dealer for necessary repairs.
Never use this device close to inflammable or explo-sive
gases,fumes or dusts
Do not try to dissemble the device.
Do not clean this edvice by using chemicals,ben-zene or
solvents.
Avoid sudden change of temperature,as this may cause
condensation inside the unit which may lead to damage.
Do not dip the device under water.
Do not put the device under endurance stress.
Avoid strong magnetic fields which may appear near
electric and electronic devices.Magnetic fields may lead to
unwanted display due to the magnetic sensi-tivity of the
WindStart.
Use the Instruments exclusively within the specified ranges.
Avoid both strong vibrations and mechanic al stress.
Notice
The type of battery used is not rechargeable.When
disposing of used batteries make sure you are in
accordance with your local refuse disposal and envi-
ronmental regulations.
Disclaimer of Warranty
Damages caused by ignoring these operating instructions
and also consequential damages will not be warranted.
Alterations to specifications are subject to change without
notice
2