Nexmosphere XY-251 Product Manual

Table of content
1. General
2. Product overview
3. Functionality and API commands
3.1 Presence & Airbutton detection
3.2 Absolute distance measurement
4. Installation requirements and guidelines
4.1 Laser safety considerations
4.2 Connection Diagrams
4.3 Hardware integration guidelines
5. Settings
5.1 Settings
5.2 Advanced settings: Field of View
5.3 Advanced settings: Output and error fi ltering
6. Quick test
1. General
The X-Eye Presence & Airbutton sensors can detect if a person is in front of the sensor and - if so - indicate the distance of
that person in relation to the sensor. Next to this, the sensor will provide an Airbutton trigger when a person places their hand
close to the sensor. This document provides explanation of the available functionalities and instructions on how to install and
integrate the sensor into your digital signage installation.
The information in this document is created for users who are familiar with the Nexmosphere API and are able to control a
basic setup with a Nexmosphere API controller. If this is not the case yet, please read the general documentation on the
Nexmosphere serial API fi rst.
2. Product overview 2. Product overview
The X-Eye Presence & Airbutton sensors are available in 2 diff erent models: The X-Eye Presence & Airbutton sensors are available in 2 diff erent models: The X-Eye Presence & Airbutton sensors are available in 2 diff erent models: The X-Eye Presence & Airbutton sensors are available in 2 diff erent models:
XY-240 XY-240 XY-240 XY-240
The shape of the models are diff erent, please refer to the datasheets for mechanical dimensions. The shape of the models are diff erent, please refer to the datasheets for mechanical dimensions. The shape of the models are diff erent, please refer to the datasheets for mechanical dimensions. The shape of the models are diff erent, please refer to the datasheets for mechanical dimensions.
The sensor specifi cations are as follows:
detection range
beam angle
The X-Eye Presence & Airbutton sensors utilize InfraRed laser
emitters with an SPAD receiving array and Time-of-Flight technology
to measure the distance of a person or object in relation to the
sensor. The working principle is that the sensor emits photons which
are refl ected by the objects or persons in front of the sensor. The
refl ected photons are received by and an array of photodetectors. By
measuring the time of fl ight of the refl ected photons, the distance of
the person or object in front of the sensor is calculated.
N e x m o s p h e r e
L e H a v r e 1 3 6
5 6 2 7 S W E i n d h o v e n • T h e N e t h e r l a n d s
X-EYE 200 SERIES | PRESENCE & AIRBUTTON SENSOR
XY-241 XY-241 XY-241 XY-241
XY-240
0 - 250 cm
27°
T + 3 1 4 0 2 4 0 7 0 7 0
E s u p p o r t @ n e x m o s p h e r e . c o m
XY-251 XY-251 XY-251 XY-251
XY-241 XY-251
0 - 170 cm 0 - 170 cm
27° 27°
© 2024 Nexmosphere. All rights reserved. v3.0 / 03-24
All content contained herein is subject to change without prior notice
PRODUCT MANUAL
1
1
2
2
3
3
3
3
4
6
6
7
8
10
1