Power Supply Warnings - Cisco WIC-1ENET - 1700 Access Routers 1port10bt Enet Wan Interface(man Configuration Manual

Power Supply Warnings

The following warnings apply when you are installing a card or working with the power supply:
Warning Read the installation instructions before you connect the system to its power source. Statement 1004
Only trained and qualified personnel should be allowed to install or replace this equipment. Statement
Warning
1030
Warning: Before working on a system that has an on/off switch, turn OFF the power and unplug the
Warning
power cord. Statement 1
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
78-11422-03
Safety Warnings
Warning Definition
11