Cisco UBR904 - Router - EN Troubleshooting Tips page 54

Debug Commands
debug cable-modem interrupts
Use the debug cable-modem interrupts command in privileged EXEC mode to debug cable
modem interrupts. The no form of this command turns debugging messages off.
[no] debug cable-modem interrupts
Syntax Description
This command has no keywords or arguments.
Command Mode
Privileged EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3 NA.
Examples
Figure 7 shows sample debug output for cable modem interrupts.
Figure 7
uBR904# debug cable-modem interrupts
*** bcm3220_rx_mac_msg_interrupt ***
*** bcm3220_rx_mac_msg_interrupt ***
### bcm3220_tx_interrupt ###
*** bcm3220_rx_mac_msg_interrupt ***
### bcm3220_tx_interrupt ###
*** bcm3220_rx_mac_msg_interrupt ***
### bcm3220_tx_interrupt ###
### bcm3220_tx_interrupt ###
### bcm3220_tx_interrupt ###
### bcm3220_tx_interrupt ###
Related Commands
debug cable-modem bpkm
debug cable-modem bridge
debug cable-modem error
debug cable-modem mac
debug cable-modem map
54 Cisco IOS Release 12.0(3)T
Sample Debug Cable-Modem Interrupts Output