Related Commands - Cisco UBR904 - Router - EN Troubleshooting Tips

Command Reference
Table 8
Field
TEK Grace Time
Auth. Reject Wait Time
Assigned SID
Max Downstream Rate
Max Upstream Rate
Upstream Priority
Min Upstream Rate
Max Upstream Burst
Privacy Enable
Ranging Backoff Start
Ranging Backoff End
Data Backoff Start
Data Backoff End
IP Address
Net Mask
TFTP Server IP Address
Time Server IP Address
Config File Name
Time Zone Offset

Related Commands

show controllers cable-modem
show controllers cable-modem bpkm
show controllers cable-modem des
show controllers cable-modem filters
show controllers cable-modem lookup-table
show controllers cable-modem phy
show controllers cable-modem tuner
44 Cisco IOS Release 12.0(3)T
Show Controllers Cable-Modem MAC State Field Descriptions (Continued)
Description
The number of seconds before the current TEK is set to expire that the TEK grace
timer begins, signaling the TEK state machine to request a replacement key.
Number of seconds the cable modem waits before sending another Authorization
Request message to the CMTS after it has received an Authorization Reject message.
Service ID assigned by the CMTS for the corresponding service class.
Maximum downstream rate in bits per second that the CMTS is permitted to forward
to CPE unicast MAC addresses learned or configured as mapping to this uBR904.
(This does not include MAC packets addressed to broadcast or multicast MAC
addresses.)
Maximum upstream rate in bits per second that the uBR904 is permitted to forward
to the RF network. This includes packet PDU data packets addressed to broadcast or
multicast addresses.
Relative priority assigned to this service class for data transmission in the upstream
channel. Higher numbers indicate higher priority.
Date rate in bits per second that will be guaranteed to this service class on the
upstream channel.
Maximum transmit burst in bytes allowed for this service class on the upstream
channel.
Indicates whether or not Baseline Privacy is enabled for this service class.
Initial back-off window for initial ranging contention, expressed as a power of 2.
Valid values are from 0 to 15.
Final back-off window for initial ranging contention, expressed as a power of 2.
Valid values are from 0 to 15.
Initial back-off window for contention data and requests, expressed as a power of 2.
Valid values are from 0 to 15.
Final back-off window for contention data and requests, expressed as a power of 2.
Valid values are from 0 to 15.
IP address of the cable interface.
Subnet mask of the cable interface.
IP address of the CMTS TFTP server.
IP address of the CMTS Time of Day (TOD) server.
Name of the configuration file that is downloaded from the TFTP server to provide
the cable modem with operational parameters.
Correction received from the DHCP server to synchronize the cable modem time
clock with the CMTS.