Download Print this page

Advertisement

Quick Links

EdenPURE
®
G9 AIR PURIFIER
OWNER'S MANUAL
IMPORTANT
SAVE THESE
INSTRUCTIONS
To ensure you get the best results from
your portable heater, please read this
manual first and keep it for future
reference. For additional information,
please contact your place of purchase
1-800-225-6595
or call
Thank you for choosing EdenPURE
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the G9 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EdenPURE G9

  • Page 1 To ensure you get the best results from your portable heater, please read this manual first and keep it for future reference. For additional information, please contact your place of purchase 1-800-225-6595 or call Thank you for choosing EdenPURE ®...
  • Page 3 Machine x1 User Manual x1 Adapter x1 Eraser x1 Remote Control x1...
  • Page 4 Take the unit out of the box and place it in a location where the air inlet is no closer than 2 ft. from the wall. Plug the unit into the outlet and turn the power on. (Pic. 1) Press the Power Button for approximately 1 second to turn the power ON.
  • Page 5 *Remark: The EdenPURE G9 Air Purifier side aperture color changes to show different air quality. The side logo is only for decoration. Fault Reminder When “9XX” appears on the display after the unit has been running for more than 3 minutes and the power indicator is blinking, clean the unit using the instructions on page 7 of this manual.
  • Page 6 3. When the Auto Mode Indicator Light is lit up, the unit automatically adjusts the fan speed based on current air quality conditions. The EdenPURE G9 Air Purifier has an emedded air quality sensor. To keep the air quality sensor reading accurate, please clean the sensor every 6 months,...
  • Page 7 Cleaning the Collecting Plates 1. Clean the collecting plates when the air purifier display shows this: -C- 2. Turn the power off and unplug the unit, then open the back of the unit and pull out the collecting plates (Pic 1). 3.
  • Page 8 1. We recommend that you do a full cleaning every 3 months. 2. Turn the power off and unplug the unit. Open the back of the unit. Pull out the catalyst filter, wire frame, collecting plates and pre-filter (Pic 1). Pull out the protective rubber sleeve as illustrated (Pic 2). 3.
  • Page 9 Important - Follow All Instructions Below...
  • Page 10 About the EdenPURE G9 Air Purifier ®...