ROOMS TO GO RETG 1421-20 Assembly Instructions

Manufactured by RETG for Rooms To Go
*** Caution : Please read all instructions carefully before starting the assembly process. These parts are
cumbersome and heavy. Therefore, two people are recommended in order to prevent personal injury and
insure the parts are not damaged during the assemble.
PARTS LIST
Description
No.
1 Table Top
2 Table Leaf
3 Legs (Left & Right)
Remark:
+ Do not fully tighten all bolts until assembly is complete
STEP 1 : Flip the table top (1) upside down. Place a blanket or some form of padding underneath of the top
when placing on a hard surface to avoid scratches. Place legs so that it fits the predetermined pin holes in
back panel of table top. Use an Allen key to tighten the bolts which were pre-installed on the table corners.
Hardware Pack Location (s):
RETG 1421-20 DINING TABLE - SKU# 42114215
Assembly Instructions
RETG 1421-20 DINING TABLE - SKU# 42114215
Q'ty
Sketch
1 Pc
1 Pc
4 Pcs
1
HARDWARE LIST
Description
No.
A
Allen Key Z
3
A
Version#1 - 09/04/2024
Zize Sketch
M4
STEP 1
3
Page 1 of 2
Q'ty
1 Pc