Operating
Instructions
COMPACT
DISC PLAYER
bi o/ OO)
7700
PD-7700
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in the explanatory drawings. However, the method of con-
ols
DIGITAL AUDIO
necting and operating the unit is the same.
WARNIN
Gro
prevent FIRE OR SHOCK HAZ-
ARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT
NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep it in a secure area. This is for your
security.
{For Canadian
model]
CAUTION: ro prevent ELECTRIC SHOCK
DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION:
eour
prevenia
Les
cHocs
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND SANS EN LAISSER
AUGUNE PARTIE A DECOUVERT.
"This product complies
with the Radio. Interference require-
ments of the EC (European Community} Directive 87/308/EEC."
TWO VOLTAGE
SELECTOR
SWITCHES
Only multi-voltage models are provided with these switches.
U.S., Canadian, European, U.K., and Australian modeis are
not provided with these switches.
The line voltage selector switch:
on the rear panel. Be-
fore your model is shipped from the
factory, these awitches
are set to the power requirements of the destination, Check
that they are set properly before plugging the power
cord
into the household wail sc
If the voltage is not proper
ly set or if you move to
an
a where th
oltage require
ments differ, adjust ihe
selector switches as follows
1. Use a medium-size
screwdriver
2. First, insert a screwdriver
in the groove of the volta
selector at the right, and adjust so that the arrow points
to the voltag
alue of your area
3. Next, in
rewdriver in the groove of the voltage
selector at the left and adjust until the voltage is the same
as at the right.
a
VOLTAGE
SELECTOR
VOLTAGE
SELECTOR
The Art of Entertainment
Need help?
Do you have a question about the PD-8700 and is the answer not in the manual?
Questions and answers