Advertisement
Quick Links
Kairos Sturnus Radio
Controller Binding Guide
1) Ensure all switches are in the disarmed
state (switches are away from you) and
the left thumb stick is pulled all the way
down. Then Press and hold the center
power button for 4 seconds until the
controller vibrates
2) Briefly press the three-line Menu button
3) The MODELSEL menu appears on the
controller display, and the menu page
number "1/12" displays in the top right of the
screen
Kairos Autonomi®
© 2024
V:\Kairos
Documentation\Calibration\KA_Sturnus_ControllerBindGuide_web_version(82nd).docx
KA_Sturnus_ControllerBindGuide.pdf
4) Press the Page button once
5) The SETUP menu appears and the top
right of the screen displays "2/12"
6) Spin the Scroll dial to scroll down
through page 2/12and move the selection
reticle (black blinking rectangle) to "[BND]"
in the row labeled "RxNum."
7) Press the Scroll dial and a sub-menu will
appear. Scroll with the dial to "Ch9-16
Telem On," then press the Scroll dial again
UxV/35
P a g e 1 o f 3
v01.00.00
Advertisement
Related Manuals for KAIROS UxV/35
Summary of Contents for KAIROS UxV/35
- Page 1 UxV/35 Kairos Sturnus Radio Controller Binding Guide 4) Press the Page button once 1) Ensure all switches are in the disarmed state (switches are away from you) and the left thumb stick is pulled all the way down. Then Press and hold the center...
- Page 2 UxV/35 The channel list will disappear, and the controller will begin to beep. 12) Power off the drone by pressing and holding the Power button for 5 seconds 13) Carefully remove the Bind tool 14) Power on the drone again by pressing...
- Page 3 When the drone is powered off all lights on the drone will turn off and the signal bars on the controller will go away This completes the radio controller binding process for the Kairos Sturnus Kairos Autonomi® P a g e 3 o f 3 © 2024 KA_Sturnus_ControllerBindGuide.pdf...
Need help?
Do you have a question about the UxV/35 and is the answer not in the manual?
Questions and answers