– Wear eye and skin protection while maintaining or servicing this unit. WARNING – Do not inhale fumes from the chlorinator or chemical container. WARNING – Chlorine feeder may be under pressure. Use caution removing cover. SAVE THESE INSTRUCTIONS USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
Page 3
– Failure to keep suction outlet components clear of debris, such as leaves, dirt, hair, paper and other material can result in an increase potential for suction entrapment as described above. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
Page 4
To reduce the risk of electric shock, do NOT use an extension cord to connect unit to electric supply. Provide USE ONLY HAYWARD GENUINE REPLACEMENT PARTS USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
Page 5
A storable pool is constructed so that it is capable of being readily disassembled for storage and reassembled to its original integrity. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
– Never install chlorine feeder directly into copper plumbing as pipe damage may occur. If you have brass or bronze backwash valves, or other sensitive metallic components, consult your dealer for precautions or recommendations for your particular system. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
Page 7
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
Page 8
If you have brass or bronze backwash valves, or other sensitive metallic components, consult your dealer for precautions or recommendations for your particular system. NOTICE – After starting up system, re-check all connections for leaks. Re-tighten as required. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
Page 9
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
Refill chlorine feeder with slow dissolving Trichlor-Chlorine Tablets. Secure cover to chlorine feeder. If installed in a flooded system, open valves to assure flow from pump to pool. 10. Turn flow control valve on chlorinator to desired setting and restart pump. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
When vacuuming, close flow control valve to prevent bypass of sediment and possible clogging of control valve. Lubrication Never use petroleum type lubricants on Cover O-Ring. To lubricate use Genuine Hayward Part Jack’s Lube No. 327 (Part No. SP032712). USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
Pool 100% 2.30 Pool 50% 0.63 Spa 100% 4.60 Spa 50% 0.48 Maximum Head Loss 2.01 PSI @ 50 GPM Dimensions CL100 CL200 14-1/2" 15-3/8" 8-3/4" (11-3/4" with Union Connections) 8-1/2" (11-1/4" with Union Connections) USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
To obtain warranty service, please contact the place of purchase or the nearest Hayward Authorized Service Center. For assistance on your nearest Hayward Authorized Service Center, please visit us at https://hayward.com/dealerlocator. Hayward shall not be responsible for cartage, removal, repair or installation labor or any other such costs incurred in obtaining warranty replacements or repair.
Need help?
Do you have a question about the CL100 Series and is the answer not in the manual?
Questions and answers