3. Installation of spray cup for door/window
First install the spray cup with hairbrush on short spray nozzle
As shown in Figure 4 and Figure 5, install the two small hooks of the spray cup for
door/window onto suspension lugs of the spray cup with hairbrush, and then trigger the big
hook of the spray cup for door/window, and push the spray cup for door/window up and
clutch it onto the body of the spray cup with hairbrush.
REFLL WATER DURING OPERATION
1.Unplug the power cord and disconnect the power supply
2.Press down the steam button to release the pressure until no steam is injected out.
3.Slowly unscrew the safety cap but do not remove it, and residual steam will be
discharged slowly until no steam comes out. Then place the machine in a cool place to
cool it down for about five minutes. Finally, completely remove the safety cap.
4.Use the funnel and measuring cup to refill a suitable quantity of cold or hot water into the
tank.
5.Re-install the safety cap onto the machine body and tighten it in position.
REFLL WATER DURING OPERATION
1.After the cleaning machine is used, unplug the power cord and disconnect the power
supply.
2.Press down the steam button to release the pressure until no steam is injected out.
3.Slowly unscrew the safety cap but do not remove it, and residual steam will be
discharged slowly until no steam comes out. Then place the machine in a cool place to
cool it down for about five minutes. Finally, completely remove the safety cap.
4.Empty the residual water in the tank and clean the external surface with a piece of dry
cloth.
5.At last, re-install the safety cap onto the machine body and tighten it in position.
Notes: Re-install the safety cap onto the machine body and tighten it in position.
1.This appliance is not intended use by persons(including children) with reduced physical,
sensory or mental capabilities, or instruction concerning use of the appliance by a person
responsible for their safety.
2.Children should be supervised to ensure that they do not play with the appliance. The
filing aperture must not be opened during use.
3.
WARNING: Danger of scalding.
16
Need help?
Do you have a question about the 853-019 and is the answer not in the manual?
Questions and answers